Bộ Công Tắc Điều Khiển Đèn Từ Xa Không Dây Rf 220v

Features:
Perfect for remote controlling of droplight, crystal lamp, modern low-pressure lamp, absorb dome light, day flower lamp, fluorescent lamp, energy-saving lamps, exhaust fan, LED light etc.
Fast and easy installation, not obstructed by walls, capable of connecting any loads. Remote controller and switch can be used simultaneously for ease and flexibility.
Every set of remote controlling switch has its special code. More sets can be used in one room without interference.

One Way Remote Control Switch:
Function:
ON/OFF and A, power on and off function. (B is an empty key, no effect)
Press SLEEP,the light flash once. Then do not move the remote control switch and turn it off in about 8-12 seconds.

Specifications:
Remote controlling distance: within 30m/98.43ft
Input voltage: 180-240V
Every port load: fluorescent lamp: 600W; energy-saving lamp: 300W
Working temperature: -20℃+ 60℃
Material: ABS
Size: remote control:11cm*4.2cm*1.5cm/4.34*1.66*0.6"; main device: 6.0cm*4.5cm*2.5cm/2.37*1.78*0.99"
Power: 12V 23A battery (not included)

Two Way Remote Control Switch:
Function:
1. A/1 will light after power on.
2. A/1 uses to turn on /off the blue group, B/2 uses to turn on /off the green group, ''ON"/"OFF" means turn on/off the whole item.
3. Manual lighting sequence (wall switch control): A / 1 , B / 2 ,the whole circuit will be turned on.

Specifications:
1. Each group can bear the 1000W incandescent light bulb and 300W energy saving lamp.
2. Working Voltage: AC180V-240V 50Hz/60Hz
3. Remote Control Battery: 12V 23A battery (not included)
4. Remote Control Distance: 30m/98.43ft
5. Load Power: 1
6. Resistive Load: The largest output power of single group within 3000W.(Like incandescent light or light bulb, etc.)

Three Way Remote Control Switch:
Function:
1. A/1 will light after power on.
2. A/1 uses to turn on /off the blue group, B/2 uses to turn on /off the white group, C/2 uses to turn on /off the yellow group, "ON"/"OFF" means turn on/off the whole item.
3. Manual lighting sequence (wall switch control): A/1 , B/2 , C/3 , the whole circuit will be turned on.

Specifications:
1. Working Voltage: AC180V-240V 50Hz/60Hz
2. Remote Control Battery: 12V 23A battery (not included)
3. Remote Control Distance: (Indoor) Greater than 20-30m/65.62-98.43ft
4. Load Power: 1
5. Resistive Load: The largest output power of single group within 1000W.(Like incandescent light or light bulb, etc.)

Notes:
1. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
2. Please allow 1-3cm measuring deviation due to manual measurement.


Included:

1 X Remote Control Receiver
1 X Remote Control Transmi