Bộ Chuyển Đổi Pci-E X1 Sang 4pci-e X16 1 Thành 4 Cổng Pci 6pin Sata Usb Kèm Phụ Kiện
693.000
₫ 512.820
Sản phẩm Bộ Chuyển Đổi Pci-E X1 Sang 4pci-e X16 1 Thành 4 Cổng Pci 6pin Sata Usb Kèm Phụ Kiện đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 693.000 xuống còn ₫ 512.820, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
1.2 layer PCB bard designing.
2. Compliant with PCI express 2.0, 1.1 Specification
3. 1-slot PCI-E 1X to 4 slot 1X riser card with high speed USB 3.0 cable.
4. High speed USB 3.0 shield cable is flexible for 1U,2U,3U chassis.
5. Support 4 port high speed PCIe 1X card.6. Solid provide extra stable power supply for PCI-e card
Instructions:
If you need more than one PCI-E x1 slot on the motherboard was not any so much, it touches you can think about it. It consists of two parts, one main card, interface
installed via PCI-E X1 on the motherboard, two equipment cards, both of which are connected together via USB 3.0 cable.
The device card also uses the United States Pericom Pericom PI7C9X bridge chip, for switching PCI-E, PCI-E between.
But even USB 3.0, but also the theoretical bandwidth 5Gbps (625MB / s), one Into four Then remove the loss would only 150MB / s, and even PCI-E 1.x single-channel
bandwidth also has 250MB / s, So this stuff more than enough to give you the best slots, there will not be enough bandwidth, not only for the performance requirements of the place. Therefore, the transferred PCI-E slot is the best version above 2.0, the 3.0 version is better.
Several Divided PCI-E 1X slot all is gen2 e, even if gen1 previously ,it can be ok.
Specifications:
1. Power Connector: usb 3.0 power cable
2. Mainboard size:(L*W*H)9.70*6.30*1.30cm/3.82 inch*2.48 inch*0.51 inch
3.PCI-E Card size:(L*W*H)11.90*6.60*1.90cm/4.69 inch*2.60 inch*0.75 inch
4.USB cable length 0.6m/1.8ft
Colour:blue
Material:plastic
Package Contents:
1 x 1 to 4 Mining Board Adapter
1 x PCI-E 1X Riser Card
1 x USB 3.0 CableOnly the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1
2. Compliant with PCI express 2.0, 1.1 Specification
3. 1-slot PCI-E 1X to 4 slot 1X riser card with high speed USB 3.0 cable.
4. High speed USB 3.0 shield cable is flexible for 1U,2U,3U chassis.
5. Support 4 port high speed PCIe 1X card.6. Solid provide extra stable power supply for PCI-e card
Instructions:
If you need more than one PCI-E x1 slot on the motherboard was not any so much, it touches you can think about it. It consists of two parts, one main card, interface
installed via PCI-E X1 on the motherboard, two equipment cards, both of which are connected together via USB 3.0 cable.
The device card also uses the United States Pericom Pericom PI7C9X bridge chip, for switching PCI-E, PCI-E between.
But even USB 3.0, but also the theoretical bandwidth 5Gbps (625MB / s), one Into four Then remove the loss would only 150MB / s, and even PCI-E 1.x single-channel
bandwidth also has 250MB / s, So this stuff more than enough to give you the best slots, there will not be enough bandwidth, not only for the performance requirements of the place. Therefore, the transferred PCI-E slot is the best version above 2.0, the 3.0 version is better.
Several Divided PCI-E 1X slot all is gen2 e, even if gen1 previously ,it can be ok.
Specifications:
1. Power Connector: usb 3.0 power cable
2. Mainboard size:(L*W*H)9.70*6.30*1.30cm/3.82 inch*2.48 inch*0.51 inch
3.PCI-E Card size:(L*W*H)11.90*6.60*1.90cm/4.69 inch*2.60 inch*0.75 inch
4.USB cable length 0.6m/1.8ft
Colour:blue
Material:plastic
Package Contents:
1 x 1 to 4 Mining Board Adapter
1 x PCI-E 1X Riser Card
1 x USB 3.0 CableOnly the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1
Sản Phẩm Liên Quan
HOT
Bikini hàng Âu
₫ 400.000
HOT
Bikini Thái quả ngang chấm bi
₫ 350.000
HOT
Bikini made in Thailand
₫ 350.000
HOT
Bikini Thái
₫ 300.000
HOT
Bikini OKISS- QCXK
₫ 400.000
HOT
Bikini xuất Âu
₫ 300.000