Bộ 50 phụ kiện hỗ trợ lát gạch sứ chuyên dụng dành cho xây dựng
356.900
₫ 179.400
Sản phẩm Bộ 50 phụ kiện hỗ trợ lát gạch sứ chuyên dụng dành cho xây dựng đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 356.900 xuống còn ₫ 179.400, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Features:
*1. Wear-resistant, resuable.
*2. Hardness increased by 35%.
*3. Easy to use for DIY operation.
*4. Keep the tile balance on the same horizontal position.
*5. Improve tile installation speed.
*6. Reduce installer fatigue/stress.
*7. Virtually lippage free, flat surface drastically.
*8. Reduce the need for grinding and polishing.
*9. Prevent tiles from moving while curing.
Specification:
Material: PP + Stainlss Steel
Quantity: 50 Sets/Bag + 1Pcs Tool
Suitable Spacer: 2mm-8mm Spacer
Tile thickness: 5mm-20mm
Brick crevice: 2mm-6mm
Using Tips:
-Paving the first tile, leave more than 2mm (use with cross spacer). Close to the tiles.
-Insert T-shaped needle along the grevice in the tile.
-Then 180° rotation,T-shaped needle stuck at the bottom of the two tiles.
-Adjust the caps with your hand/special wrench until the two tiles are on the same level.
-About 5-6 hours after leveling, Before cement/adhesive is completely dry, rotate caps in the reverse direction, remove 180° T-needle until the word, take out.
Package including:
50 * Tile leveler with changeable needle
1 * Wrench
Note:
-Due to the light and screen setting difference, the item's color may be slightly different from the pictures.
-Please allow slight dimension difference due to different manual measure
*1. Wear-resistant, resuable.
*2. Hardness increased by 35%.
*3. Easy to use for DIY operation.
*4. Keep the tile balance on the same horizontal position.
*5. Improve tile installation speed.
*6. Reduce installer fatigue/stress.
*7. Virtually lippage free, flat surface drastically.
*8. Reduce the need for grinding and polishing.
*9. Prevent tiles from moving while curing.
Specification:
Material: PP + Stainlss Steel
Quantity: 50 Sets/Bag + 1Pcs Tool
Suitable Spacer: 2mm-8mm Spacer
Tile thickness: 5mm-20mm
Brick crevice: 2mm-6mm
Using Tips:
-Paving the first tile, leave more than 2mm (use with cross spacer). Close to the tiles.
-Insert T-shaped needle along the grevice in the tile.
-Then 180° rotation,T-shaped needle stuck at the bottom of the two tiles.
-Adjust the caps with your hand/special wrench until the two tiles are on the same level.
-About 5-6 hours after leveling, Before cement/adhesive is completely dry, rotate caps in the reverse direction, remove 180° T-needle until the word, take out.
Package including:
50 * Tile leveler with changeable needle
1 * Wrench
Note:
-Due to the light and screen setting difference, the item's color may be slightly different from the pictures.
-Please allow slight dimension difference due to different manual measure
Sản Phẩm Liên Quan
HOT
Bikini hàng Âu
₫ 400.000
HOT
Bikini Thái quả ngang chấm bi
₫ 350.000
HOT
Bikini made in Thailand
₫ 350.000
HOT
Bikini Thái
₫ 300.000
HOT
Bikini OKISS- QCXK
₫ 400.000
HOT
Bikini xuất Âu
₫ 300.000