Bộ 5 Kim Thép Không Gỉ Dùng Để Vệ Sinh Máy In 3d
31.295
₫ 20.029
Sản phẩm Bộ 5 Kim Thép Không Gỉ Dùng Để Vệ Sinh Máy In 3d đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 31.295 xuống còn ₫ 20.029, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
#5Pcs #3D #Printer #Nozzle #Bendable #Cleaning #Needles #Stainless #Steel #Drill #Bit
5Pcs 3D Printer Nozzle Bendable Cleaning Needles Stainless Steel Drill Bit
Features:
Color: Silver
Material: Stainless steel
Functions: Special cleaning bit for printer nozzle
Quantity: 5pcs/ Barrels
Specification: 0.15mm，0.2mm，0.25mm，0.3mm，0.35mm，0.4mm
How to use:
Clean the plug method:
Heating nozzle temperature
1. Put nozzle temperature manual adjusting to 240 ℃, remove front fan, after the temperature arrives, manually to the feed pipe kneading silk, to make the nozzle out of the wire properly. Then pull out the glue wire, and then enter the feed throat, wait a little bit after the silk melt, pull out the glue wire, make the half melted glue wire to take out the residue in the nozzle, repeat the operation several times.
2. Use corresponding nozzle size of steel wire or drill bit to clear nozzle. Then repeat process 1.
3. Remove the nozzle and clean it in acetone solution. Because the acetone solution dissolves the plastic,therefore the nozzle can be put into the solution to cooperate in the process of 2, because the acetone solution is a chemical liquid, the process of claiming that we bring a special protective gloves.
Packing include:
5 x 3D printer nozzle cleaning nee
5Pcs 3D Printer Nozzle Bendable Cleaning Needles Stainless Steel Drill Bit
Features:
Color: Silver
Material: Stainless steel
Functions: Special cleaning bit for printer nozzle
Quantity: 5pcs/ Barrels
Specification: 0.15mm，0.2mm，0.25mm，0.3mm，0.35mm，0.4mm
How to use:
Clean the plug method:
Heating nozzle temperature
1. Put nozzle temperature manual adjusting to 240 ℃, remove front fan, after the temperature arrives, manually to the feed pipe kneading silk, to make the nozzle out of the wire properly. Then pull out the glue wire, and then enter the feed throat, wait a little bit after the silk melt, pull out the glue wire, make the half melted glue wire to take out the residue in the nozzle, repeat the operation several times.
2. Use corresponding nozzle size of steel wire or drill bit to clear nozzle. Then repeat process 1.
3. Remove the nozzle and clean it in acetone solution. Because the acetone solution dissolves the plastic,therefore the nozzle can be put into the solution to cooperate in the process of 2, because the acetone solution is a chemical liquid, the process of claiming that we bring a special protective gloves.
Packing include:
5 x 3D printer nozzle cleaning nee
Sản Phẩm Liên Quan
HOT
Bikini hàng Âu
₫ 400.000
HOT
Bikini Thái quả ngang chấm bi
₫ 350.000
HOT
Bikini made in Thailand
₫ 350.000
HOT
Bikini Thái
₫ 300.000
HOT
Bikini OKISS- QCXK
₫ 400.000
HOT
Bikini xuất Âu
₫ 300.000