Bộ 4 Cảm Biến Áp Suất Lốp Xe Chất Lượng Cao Tpms Cho Mazda Cx-30 3 (Bp) B-Hatch
₫ 897.000
Sản phẩm Bộ 4 Cảm Biến Áp Suất Lốp Xe Chất Lượng Cao Tpms Cho Mazda Cx-30 3 (Bp) B-Hatch đang được mở bán với mức giá siêu tốt khi mua online, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
No sensor programming Required : The Tire Pressure Sensor is 100% new and come pre-programmed specifically for your make/el/year of vehicle,need activate them by scal tool or "re-learning".
Simplified Relearn : AUTO Relearn Installation of TPMS is recommended to be performed only by trained professionals.
Part Number: BDEL-37-140
MPREHENSIVE VEHICLE COVERAGE Installation Process:
1. Loosen the tire: Remove the vae cap and core and deflate the tire.
2. Dismount the tire: Clamp the tire onto the tire changer, and adjust the vae at 1 o'clock relative to the tire separation head. Insert the tire tool and lift the tire bead onto the mounting head to discount the head.
3. Dismount the sensor: With a screwdriver remove the fastening screw and sensor from the Vae stem, then loosen the nut and remove the vae.
4. Mount sensor and vae: Slide the vae stem through the vae hole of the rim. Tighten the screw-nut with 4.0 Nm with the help of the positioning pin. Assemble the sensor body against the rim and tighten the screw.
5. Mount the tire: Place the tire on the rim, making sure that the vae faces the separation head at an angle of 180 degrees. Mount the tire over the rim.
Fit Car:
For Mazda 3 (BP)(from 2019-02 to 2024-06)
For Mazda B-Hatch Xev(from 2020-09 to 2027-09)
For Mazda CX-30(from 2019-11 to 2024-10)
colour:Black
Material:ABS
Package Contents:
4 x Tire Pressure SensorOnly the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1
Simplified Relearn : AUTO Relearn Installation of TPMS is recommended to be performed only by trained professionals.
Part Number: BDEL-37-140
MPREHENSIVE VEHICLE COVERAGE Installation Process:
1. Loosen the tire: Remove the vae cap and core and deflate the tire.
2. Dismount the tire: Clamp the tire onto the tire changer, and adjust the vae at 1 o'clock relative to the tire separation head. Insert the tire tool and lift the tire bead onto the mounting head to discount the head.
3. Dismount the sensor: With a screwdriver remove the fastening screw and sensor from the Vae stem, then loosen the nut and remove the vae.
4. Mount sensor and vae: Slide the vae stem through the vae hole of the rim. Tighten the screw-nut with 4.0 Nm with the help of the positioning pin. Assemble the sensor body against the rim and tighten the screw.
5. Mount the tire: Place the tire on the rim, making sure that the vae faces the separation head at an angle of 180 degrees. Mount the tire over the rim.
Fit Car:
For Mazda 3 (BP)(from 2019-02 to 2024-06)
For Mazda B-Hatch Xev(from 2020-09 to 2027-09)
For Mazda CX-30(from 2019-11 to 2024-10)
colour:Black
Material:ABS
Package Contents:
4 x Tire Pressure SensorOnly the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1
Sản Phẩm Liên Quan
HOT
Bikini hàng Âu
₫ 400.000
HOT
Bikini Thái quả ngang chấm bi
₫ 350.000
HOT
Bikini made in Thailand
₫ 350.000
HOT
Bikini Thái
₫ 300.000
HOT
Bikini OKISS- QCXK
₫ 400.000
HOT
Bikini xuất Âu
₫ 300.000