Bảng Mạch Thu Phát Tín Hiệu Bluetooth Wer Hc-05 6pin Cho Arduino
86.091
₫ 59.415
Sản phẩm Bảng Mạch Thu Phát Tín Hiệu Bluetooth Wer Hc-05 6pin Cho Arduino đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 86.091 xuống còn ₫ 59.415, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
#HC-05 #6Pin #Wireless #Bluetooth #RF #Transceiver #Board #Module #Serial #For #Arduino
HC-05 6Pin Wireless Bluetooth RF Transceiver Board Module Serial For Arduino
Description:
With VCC, GND, TXD, RXD, KEY foot for the Bluetooth
Led indicate Bluetooth connection status, fast flash indicates unpaired, slow flash indicates AT mode, double flash indicates machine connected
Backplane settings LDO input voltage of 3.6-6V unpaired current is about 30mA, paired 10mA, input voltage prohibit more than 7V absolute prohibition of reverse power
Interface level 3.3V, can be directly connected the various SCM (51, AVR, PIC, ARM, MSP430, etc.), the 5V MCU also can be connected directly, without MAX232 can not go through the MAX232
Open to effective distance of 10 meters, over 10 meters is also possible, but not of this the quality of the connection of the distance do to ensure
The pair later when full-duplex serial use, do not need to know anything about the
Bluetooth protocol, but only supports 8 data bits, 1 stop bit, no parity communication format, which is the most commonly used communication format does not support other formats
Support to establish a Bluetooth connection through AT commands set the baud rate, passkey, set parameters are saved after
Specification:
Brand new
Input voltage: 3.6-6V
Working current: matching for 30 mA, matching the communication for 10 mA
Output Power Class: Class 2
Size: approx. 3.7x1.6cm/1.46x0.63inch
Quantity: 1 Pc
Note:
Please allow 1-3mm error due to manual measurement. pls make sure you do not mind before you bid
Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
Package Contents:
1 Pc x Transceiver Mo
HC-05 6Pin Wireless Bluetooth RF Transceiver Board Module Serial For Arduino
Description:
With VCC, GND, TXD, RXD, KEY foot for the Bluetooth
Led indicate Bluetooth connection status, fast flash indicates unpaired, slow flash indicates AT mode, double flash indicates machine connected
Backplane settings LDO input voltage of 3.6-6V unpaired current is about 30mA, paired 10mA, input voltage prohibit more than 7V absolute prohibition of reverse power
Interface level 3.3V, can be directly connected the various SCM (51, AVR, PIC, ARM, MSP430, etc.), the 5V MCU also can be connected directly, without MAX232 can not go through the MAX232
Open to effective distance of 10 meters, over 10 meters is also possible, but not of this the quality of the connection of the distance do to ensure
The pair later when full-duplex serial use, do not need to know anything about the
Bluetooth protocol, but only supports 8 data bits, 1 stop bit, no parity communication format, which is the most commonly used communication format does not support other formats
Support to establish a Bluetooth connection through AT commands set the baud rate, passkey, set parameters are saved after
Specification:
Brand new
Input voltage: 3.6-6V
Working current: matching for 30 mA, matching the communication for 10 mA
Output Power Class: Class 2
Size: approx. 3.7x1.6cm/1.46x0.63inch
Quantity: 1 Pc
Note:
Please allow 1-3mm error due to manual measurement. pls make sure you do not mind before you bid
Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
Package Contents:
1 Pc x Transceiver Mo