Bảng mạch sưởi ấm đĩa bay mini diy 120w dc 5v~12v không có quạt làm mát
194.200
₫ 126.800
Sản phẩm Bảng mạch sưởi ấm đĩa bay mini diy 120w dc 5v~12v không có quạt làm mát đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 194.200 xuống còn ₫ 126.800, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
#120W #DC #5V~12V #Mini #ZVS #Induction #Heating #Board #Flyback #Driver #Heater #Coil #DIY #Heating #Plate
120W DC 5V~12V Mini ZVS Induction Heating Board Flyback Driver Heater Coil DIY Heating Plate without Cooling Fan
100% brand new and high quality
Features:
Mini ZVS induction heating plate and heater coil without cooling fan.
High power 120W (when 12V induction heating). Push the ignition coil 12V, when the primary 10 turns, 30W or so.
Input voltage DC 5V~12V, this voltage range is the voltage when working, not the voltage when the power supply is no-load! (The seller does not ensure normal operation if the voltage exceeds 12V or is lower than 5V. If the input voltage is not within this range, the seller will not be responsible for any problems!)
Confirm that all components are welded correctly, and the power cord is not reversed. After connecting the load (heating coil), then power on! No power on without load! No-load power on is easy to damage!
The width of the heated object should be as far as possible between 1/3~1/2 of the inner diameter of the heating coil, not more than 2/3!
The diameter of the heating object should be controlled within 20mm as much as possible. If it is too large, it will be more difficult to heat to redness. After all, the power is limited.
In induction heating, the power is cut off for 5 minutes to cool. In induction heating, it is better to solder the heating coil directly to the PCB board. For long-term use, it is recommended to use copper tubes as coils and pass water for cooling.
In induction heating, it is better to solder the heating coil directly to the PCB board. In the case of induction heating, it should be powered off and cooled after 5 minutes of work. For long-term use, it is recommended to use copper tubes as coils and use water for cooling.
Tips: The heating plate cannot be powered by batteries or storage batteries!
Specifications:
Materials: plastic + metal
Input Voltage: DC 5V~12V
Power: 120W
Color: As pictures shown
Size: app.37x56mm/1.46x2.20in
Quantity: 1set
Note:
No retail package.
Please allow 0-1cm error due to manual measurement. pls make sure you do not mind before you bid.
Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
Package includes:
1 x Heating Board
1 x Heater Coil(other accessories demo in the picture is not inclu
120W DC 5V~12V Mini ZVS Induction Heating Board Flyback Driver Heater Coil DIY Heating Plate without Cooling Fan
100% brand new and high quality
Features:
Mini ZVS induction heating plate and heater coil without cooling fan.
High power 120W (when 12V induction heating). Push the ignition coil 12V, when the primary 10 turns, 30W or so.
Input voltage DC 5V~12V, this voltage range is the voltage when working, not the voltage when the power supply is no-load! (The seller does not ensure normal operation if the voltage exceeds 12V or is lower than 5V. If the input voltage is not within this range, the seller will not be responsible for any problems!)
Confirm that all components are welded correctly, and the power cord is not reversed. After connecting the load (heating coil), then power on! No power on without load! No-load power on is easy to damage!
The width of the heated object should be as far as possible between 1/3~1/2 of the inner diameter of the heating coil, not more than 2/3!
The diameter of the heating object should be controlled within 20mm as much as possible. If it is too large, it will be more difficult to heat to redness. After all, the power is limited.
In induction heating, the power is cut off for 5 minutes to cool. In induction heating, it is better to solder the heating coil directly to the PCB board. For long-term use, it is recommended to use copper tubes as coils and pass water for cooling.
In induction heating, it is better to solder the heating coil directly to the PCB board. In the case of induction heating, it should be powered off and cooled after 5 minutes of work. For long-term use, it is recommended to use copper tubes as coils and use water for cooling.
Tips: The heating plate cannot be powered by batteries or storage batteries!
Specifications:
Materials: plastic + metal
Input Voltage: DC 5V~12V
Power: 120W
Color: As pictures shown
Size: app.37x56mm/1.46x2.20in
Quantity: 1set
Note:
No retail package.
Please allow 0-1cm error due to manual measurement. pls make sure you do not mind before you bid.
Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
Package includes:
1 x Heating Board
1 x Heater Coil(other accessories demo in the picture is not inclu
Sản Phẩm Liên Quan
HOT
Bikini hàng Âu
₫ 400.000
HOT
Bikini Thái quả ngang chấm bi
₫ 350.000
HOT
Bikini made in Thailand
₫ 350.000
HOT
Bikini Thái
₫ 300.000
HOT
Bikini OKISS- QCXK
₫ 400.000
HOT
Bikini xuất Âu
₫ 300.000