Bảng Mạch Sạc Pin Lithium Ion Lifepo4 Redkee 3.6 / 4.2v Tp5000
40.000
₫ 28.665
Sản phẩm Bảng Mạch Sạc Pin Lithium Ion Lifepo4 Redkee 3.6 / 4.2v Tp5000 đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 40.000 xuống còn ₫ 28.665, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Dear, welcome to REDKEE, here are the latest season products for you to choose, the hottest products, the best prices, we also provide 1021H online Q & A, if you have any questions, please consult our customer service, for more information about the product, Please read on ~
Features:
Switch buck mode has higher efficiency and fever than linear charging circuit. Charging current 1A, in constant current charge to maintain 1A. No additional heat dissipation is needed, which reduces the influence of heating on charging current. Reduce charging time. Ordinary lithium-ion lithium polymer batteries or lithium iron phosphate batteries can be selected. Only one jumper is needed to change the settings.
Specifications:
Material: ABS
Size: 21.5*14.5*4.2mm/0.85*0.57*0.17"
Input: 4.5-9V
Output voltage: 4.2V/3.6V±1% (PCB default lithium-ion battery 4.2V)
Output current: default 1A
Usage:
1. Lithium batteries only need to be connected with 5V power supply and output B+B-to be connected with batteries. In charging, the red light is on, the charge is full and the green light is on after charging.
2. For lithium iron phosphate batteries of 3.6V, only soldering iron is needed to open the tin spot between the two soldering pads. The connection method of the power battery is unchanged as described above. If it is necessary to recharge 4.2V lithium batteries, the solder pad can be dipped and soldered to connect the batteries.
Notes:
1. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
2. Please allow 1-3mm measuring deviation due to manual measurement.
Included:
1 XBattery Charging
Features:
Switch buck mode has higher efficiency and fever than linear charging circuit. Charging current 1A, in constant current charge to maintain 1A. No additional heat dissipation is needed, which reduces the influence of heating on charging current. Reduce charging time. Ordinary lithium-ion lithium polymer batteries or lithium iron phosphate batteries can be selected. Only one jumper is needed to change the settings.
Specifications:
Material: ABS
Size: 21.5*14.5*4.2mm/0.85*0.57*0.17"
Input: 4.5-9V
Output voltage: 4.2V/3.6V±1% (PCB default lithium-ion battery 4.2V)
Output current: default 1A
Usage:
1. Lithium batteries only need to be connected with 5V power supply and output B+B-to be connected with batteries. In charging, the red light is on, the charge is full and the green light is on after charging.
2. For lithium iron phosphate batteries of 3.6V, only soldering iron is needed to open the tin spot between the two soldering pads. The connection method of the power battery is unchanged as described above. If it is necessary to recharge 4.2V lithium batteries, the solder pad can be dipped and soldered to connect the batteries.
Notes:
1. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
2. Please allow 1-3mm measuring deviation due to manual measurement.
Included:
1 XBattery Charging