Bảng mạch bảo vệ pin Lithium 3 X 11.1V 12V 12.6V
₫ 25.700
Sản phẩm Bảng mạch bảo vệ pin Lithium 3 X 11.1V 12V 12.6V đang được mở bán với mức giá siêu tốt khi mua online, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
🐕Store small bulletin board🐕
1: because of the limited availability of goods on board, not all of the components materials on board need to be supplied with material information to ask the price
Note:
This protective plate cannot be used for iron-separated polymer batteries, hand-drill batteries, fish machine batteries, electric bicycle batteries, 2 units in series 24v, 775 (4a) above motor, 1w fisheye led light.
The range of power described applies to the following products:
Massager battery set, led light backup power supply, 12v electronics, solar lamp battery group, monitoring backup power supply, and other products.
Note: 3a current above diskharge product, battery diskharge multiple rate is above 3c.
Formula of multiplier: 1c-rate battery, 2000 capacity equal to 2ahx1 2a maximum working current.
3c multiple battery, 2000 capacity equal to 2 ahx 3 6a upper working current.
Batteries in use are hot because the battery multiples are not suitable. this must not be used for long periods of time and the battery will soon be damaged.
Note 1: strictly line 0v (b-), 3.7v (b1), 7.4v (b2), 11.1v (b+) and do not intentionally short circuit
Note 2: after connecting the line, you need to recharge before you can output.
Note 3: when series 3 batteries, make sure the voltage is the same for each battery. if not, please fill each battery separately and use it in series.Voltage drops during diskharge tests.The fast battery is a bad battery.
For some customers with a poor electronic base, please don't mix good batteries with bad ones The closer the capacity/internal resistance of the 3 cells, the better (2 good batteries+1 poor battery 3 poor battery).
Properties of the lithium battery protection plate:
Model: hx-3s-fl10-a overcharge voltage range: 4.25-4.35 v 0.05 v
Size: 53x17 x 4.0 mm overvoltage range: 2.3-3.0 v 0.05v
Working current: 0-8a working temperature:-40-+50°C
Instant current: 11-13a storage conditions:-40-+80°C
Static current: less than 30ua active life: greater than 30000 hours
Internal resistance: less than 100 m short circuit protection: protective, delayed self-recovery.
Description of the size and device of the protective plate
The protective plate size is 53x17 x 4.0 mm components for 2110-cb protection chips and aod
1: because of the limited availability of goods on board, not all of the components materials on board need to be supplied with material information to ask the price
Note:
This protective plate cannot be used for iron-separated polymer batteries, hand-drill batteries, fish machine batteries, electric bicycle batteries, 2 units in series 24v, 775 (4a) above motor, 1w fisheye led light.
The range of power described applies to the following products:
Massager battery set, led light backup power supply, 12v electronics, solar lamp battery group, monitoring backup power supply, and other products.
Note: 3a current above diskharge product, battery diskharge multiple rate is above 3c.
Formula of multiplier: 1c-rate battery, 2000 capacity equal to 2ahx1 2a maximum working current.
3c multiple battery, 2000 capacity equal to 2 ahx 3 6a upper working current.
Batteries in use are hot because the battery multiples are not suitable. this must not be used for long periods of time and the battery will soon be damaged.
Note 1: strictly line 0v (b-), 3.7v (b1), 7.4v (b2), 11.1v (b+) and do not intentionally short circuit
Note 2: after connecting the line, you need to recharge before you can output.
Note 3: when series 3 batteries, make sure the voltage is the same for each battery. if not, please fill each battery separately and use it in series.Voltage drops during diskharge tests.The fast battery is a bad battery.
For some customers with a poor electronic base, please don't mix good batteries with bad ones The closer the capacity/internal resistance of the 3 cells, the better (2 good batteries+1 poor battery 3 poor battery).
Properties of the lithium battery protection plate:
Model: hx-3s-fl10-a overcharge voltage range: 4.25-4.35 v 0.05 v
Size: 53x17 x 4.0 mm overvoltage range: 2.3-3.0 v 0.05v
Working current: 0-8a working temperature:-40-+50°C
Instant current: 11-13a storage conditions:-40-+80°C
Static current: less than 30ua active life: greater than 30000 hours
Internal resistance: less than 100 m short circuit protection: protective, delayed self-recovery.
Description of the size and device of the protective plate
The protective plate size is 53x17 x 4.0 mm components for 2110-cb protection chips and aod
Sản Phẩm Liên Quan
HOT