Bảng Mạch Phát Triển Nhiệt Độ Độ Ẩm Esp8266 Với 0.96 Oled
₫ 477.700
Sản phẩm Bảng Mạch Phát Triển Nhiệt Độ Độ Ẩm Esp8266 Với 0.96 Oled đang được mở bán với mức giá siêu tốt khi mua online, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Our products only provide product information or details, without technical support, buyers need to understand, thank you for your cooperation
The design concept is derived from open source project nodemcu, which integrates 18650 charging and diskharging system, self-charging and diskharging protection, and an oled and five-directional keystroke for easy development.
This baby operation is consistent with nodemcu, adding a programmable led that can be controlled by gpio 16, displaying the 8266 running state and so on.Integrated oled and five-way keys to make it easier to develop
The five-way keys are controlled by flath, rset, d5, d6, d7, respectively
Oled's s sda and scl received d1 and d2 feet, respectively
5 digit pins can be configured with write/read/interim/pwm/i2c/one-wire supported
1 ad input
Integrated 18650 battery charging and diskharge system
Micro usb input
Arduino compatible
Nodemcu compatible
Wide voltage input range 5v~12v
1 switch to control 18650 power supply
1 programmable led (d0)
Charging protection
Diskharge protection
Please don't record the program while charging. when you record the program, unplug the battery and make sure the switch is on
Note: this product does not contain 18650 batteries. the battery can not be installled back-to-back, otherwise the charging chip will burn down
Charging recommendation 5v500ma charger for charging,Fever at or above 5v1a,Not affecting normal work,But don't touch the charging chip or carry it with you during charging,Charging chips and diodes rise to about 60 degrees when measured,No fever at normal work,Don't worry about carryin
The design concept is derived from open source project nodemcu, which integrates 18650 charging and diskharging system, self-charging and diskharging protection, and an oled and five-directional keystroke for easy development.
This baby operation is consistent with nodemcu, adding a programmable led that can be controlled by gpio 16, displaying the 8266 running state and so on.Integrated oled and five-way keys to make it easier to develop
The five-way keys are controlled by flath, rset, d5, d6, d7, respectively
Oled's s sda and scl received d1 and d2 feet, respectively
5 digit pins can be configured with write/read/interim/pwm/i2c/one-wire supported
1 ad input
Integrated 18650 battery charging and diskharge system
Micro usb input
Arduino compatible
Nodemcu compatible
Wide voltage input range 5v~12v
1 switch to control 18650 power supply
1 programmable led (d0)
Charging protection
Diskharge protection
Please don't record the program while charging. when you record the program, unplug the battery and make sure the switch is on
Note: this product does not contain 18650 batteries. the battery can not be installled back-to-back, otherwise the charging chip will burn down
Charging recommendation 5v500ma charger for charging,Fever at or above 5v1a,Not affecting normal work,But don't touch the charging chip or carry it with you during charging,Charging chips and diodes rise to about 60 degrees when measured,No fever at normal work,Don't worry about carryin
Sản Phẩm Liên Quan
HOT
Bikini hàng Âu
₫ 400.000
HOT
Bikini Thái quả ngang chấm bi
₫ 350.000
HOT
Bikini made in Thailand
₫ 350.000
HOT
Bikini Thái
₫ 300.000
HOT
Bikini OKISS- QCXK
₫ 400.000
HOT
Bikini xuất Âu
₫ 300.000