Bảng Mạch Phát Triển Esp8266 Esp-12E Uart Cho Arduino Uno R3 Bo Mạch
₫ 111.806
Sản phẩm Bảng Mạch Phát Triển Esp8266 Esp-12E Uart Cho Arduino Uno R3 Bo Mạch đang được mở bán với mức giá siêu tốt khi mua online, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
ESP8266 WiFi Shield - ESP 12E WiFi expansion board Serial Uno R3
+ Fully compatible with Arduino Uno, Mega, etc. using standard pin interface spacing.
+ Using the advanced 3.3V power chip
+ A WiFi module power/service interface is introduced to facilitate developers to extend power and maintenance.
+ The onboard ESP8266-12 industrial grade stable serial WiFi module uses an enhanced PCB antenna for better signal .
+ The operation mode (such as operation mode and upgrade mode) of the ESP8266-12 industrial-grade stable WiFi module can be quickly switched by the DIP switch, and the serial port chip can be integrated to quickly write the firmware.
+ Built-in 5V to 3.3V TTL level shifter prevents high voltage Arduino TTL levels from damaging the WiFi module. (General modules are not available)
+ The onboard ESP8266-12 industrial grade stable WiFi module has a metal shield and is highly resistant to interference.
+ All interfaces of the onboard ESP8266-12 industrial grade stable WiFi module are taken out at standard intervals , which is convenient for developers to develop in depth.
+ The Arduino library of the ESP8266-12 industrial-grade stable WiFi module written by this station can be controlled by very simple instructions to provide routines.
+ With a stackable design , you can continue to add other modules on top for ease of use.
+ The onboard 4 LEDs show the status of the ESP8266, which are PWR, DFU, AP, STA, and the operation mode is clear at a glance.
This product can be applied to:
+ Remote control appliances/models/four-axis aircraft, etc.
+ Networking services for non-smart devices
+ Household temperature / humidity / PM2.5 display, etc.
+ Smart s
+ Fully compatible with Arduino Uno, Mega, etc. using standard pin interface spacing.
+ Using the advanced 3.3V power chip
+ A WiFi module power/service interface is introduced to facilitate developers to extend power and maintenance.
+ The onboard ESP8266-12 industrial grade stable serial WiFi module uses an enhanced PCB antenna for better signal .
+ The operation mode (such as operation mode and upgrade mode) of the ESP8266-12 industrial-grade stable WiFi module can be quickly switched by the DIP switch, and the serial port chip can be integrated to quickly write the firmware.
+ Built-in 5V to 3.3V TTL level shifter prevents high voltage Arduino TTL levels from damaging the WiFi module. (General modules are not available)
+ The onboard ESP8266-12 industrial grade stable WiFi module has a metal shield and is highly resistant to interference.
+ All interfaces of the onboard ESP8266-12 industrial grade stable WiFi module are taken out at standard intervals , which is convenient for developers to develop in depth.
+ The Arduino library of the ESP8266-12 industrial-grade stable WiFi module written by this station can be controlled by very simple instructions to provide routines.
+ With a stackable design , you can continue to add other modules on top for ease of use.
+ The onboard 4 LEDs show the status of the ESP8266, which are PWR, DFU, AP, STA, and the operation mode is clear at a glance.
This product can be applied to:
+ Remote control appliances/models/four-axis aircraft, etc.
+ Networking services for non-smart devices
+ Household temperature / humidity / PM2.5 display, etc.
+ Smart s
Sản Phẩm Liên Quan
HOT
Bikini hàng Âu
₫ 400.000
HOT
Bikini Thái quả ngang chấm bi
₫ 350.000
HOT
Bikini made in Thailand
₫ 350.000
HOT
Bikini Thái
₫ 300.000
HOT
Bikini OKISS- QCXK
₫ 400.000
HOT
Bikini xuất Âu
₫ 300.000