Bảng Mạch Phát Triển Đồng Hồ Thông Minh Có Màn Hình Oled Kết Nối Wifi
589.000
₫ 540.000
Sản phẩm Bảng Mạch Phát Triển Đồng Hồ Thông Minh Có Màn Hình Oled Kết Nối Wifi đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 589.000 xuống còn ₫ 540.000, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Description:
Design: The development board is equipped with a 1.3-inch OLED, the core is SH1106, an RGB light and a three-way momentary slide switch.
Battery Powered: It is powered by a 3.7V rechargeable battery. The USB port can be used as a programming port or a charging port.
Small Size: The small size is very convenient with a watch strap and can be used to control the device anytime, anywhere.
Use: With this software, you can perform different attacks to test WiFi networks, you can also use it to develop your own software.
Watch: It is an ESP8266 development board, but you can wear it like a smartwatch, more convenient.
Test introduction:
1. Connect the USB cable and computer, open the serial port driver folder, and install the CH340 driver. If it has been installed and tested before, there is no need to install it.
If it cannot be used, the drive may be too low and need to be reinstalled;
2. Open the FLASH_DOWNLOAD_TOOLS_V3.6.7 of the programming software and select ESP8266
3. Then select the ESP8266_DEAUTHER.BIN of the project file and burn it to the ESP8266 watch
Please note: When developing a programming program for the ESP8266 watch, the upper and lower boards need to be connected to the cable and turn on the switch to burn normally!
Specification:
Material: PCB
Color: black
Size(approx): 45*38mm/1.77*1.5inch(L*W)
Battery: built in rechargable battery
Indicate charging LED: Red means charging, off means full
Package:
1 pc x WiFi development board kit
#Development #Board #ESP8266 #Watch #Programmable #OLED #Dispaly #Professional #Practical #Accessories #Tool #Durable #Por
Design: The development board is equipped with a 1.3-inch OLED, the core is SH1106, an RGB light and a three-way momentary slide switch.
Battery Powered: It is powered by a 3.7V rechargeable battery. The USB port can be used as a programming port or a charging port.
Small Size: The small size is very convenient with a watch strap and can be used to control the device anytime, anywhere.
Use: With this software, you can perform different attacks to test WiFi networks, you can also use it to develop your own software.
Watch: It is an ESP8266 development board, but you can wear it like a smartwatch, more convenient.
Test introduction:
1. Connect the USB cable and computer, open the serial port driver folder, and install the CH340 driver. If it has been installed and tested before, there is no need to install it.
If it cannot be used, the drive may be too low and need to be reinstalled;
2. Open the FLASH_DOWNLOAD_TOOLS_V3.6.7 of the programming software and select ESP8266
3. Then select the ESP8266_DEAUTHER.BIN of the project file and burn it to the ESP8266 watch
Please note: When developing a programming program for the ESP8266 watch, the upper and lower boards need to be connected to the cable and turn on the switch to burn normally!
Specification:
Material: PCB
Color: black
Size(approx): 45*38mm/1.77*1.5inch(L*W)
Battery: built in rechargable battery
Indicate charging LED: Red means charging, off means full
Package:
1 pc x WiFi development board kit
#Development #Board #ESP8266 #Watch #Programmable #OLED #Dispaly #Professional #Practical #Accessories #Tool #Durable #Por
Sản Phẩm Liên Quan
HOT
Bikini hàng Âu
₫ 400.000
HOT
Bikini Thái quả ngang chấm bi
₫ 350.000
HOT
Bikini made in Thailand
₫ 350.000
HOT
Bikini Thái
₫ 300.000
HOT
Bikini OKISS- QCXK
₫ 400.000
HOT
Bikini xuất Âu
₫ 300.000