Bảng Mạch Nâng Cấp 5v Nano V3.0 Atmega328p Nrf24l01 + 2.4g Ch340 Cho Arduino
₫ 238.800
Sản phẩm Bảng Mạch Nâng Cấp 5v Nano V3.0 Atmega328p Nrf24l01 + 2.4g Ch340 Cho Arduino đang được mở bán với mức giá siêu tốt khi mua online, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Features:
-Upgraded nano board for arduino. The main chip is ATMEGA328P-MU QFN32, the latest bootloader (for Arduino IDE 1.8.8) was burned down.
It is fully compatible with the common nano board. RF-Nano-Board is PIN-PIN with for Arduino Nano V3.0, and share the same codes.
-Emakefun RF-Nano-Board integrates a NRF24L01+ module with for Arduino nano v3.0 board, which is very convenient for 2.4G wireless connect application.
-We used high quality PCB original material and Immersion Gold Technology to make sure every board has smooth edge and more reliable.
-The PCB size is only about 48mm*19mm, the pin is fully compatible with Nano V3.0, No Soldering needed. The micro usb port is more convenient to use.
Specification:
Microcontroller: ATmega328P
Nrf24L01+ 2.4G wireless
Architecture AVR
Operating Voltage: 5V
Flash Memory: 32 KB of which 2 KB used by bootloader
SRAM: 2 KB
Clock Speed: 16 MHz
Analog I/O Pins: 8
EEPROM: 1 KB
DC Current: per I/O Pins 40 mA (I/O Pins)
Input Voltage: 7-12 V
Digital I/O Pins: 22
PWM Output: 6
Power Consumption: 19 mA
PCB Size: about 48 x 18mm
Weight: about 10 g
Package includes:
1 * Nano Board
If you have any doubts or uncertainty about this item, contact us with no hesitation, we are always here and will solve your problems.
Thanks and wish you a nice
-Upgraded nano board for arduino. The main chip is ATMEGA328P-MU QFN32, the latest bootloader (for Arduino IDE 1.8.8) was burned down.
It is fully compatible with the common nano board. RF-Nano-Board is PIN-PIN with for Arduino Nano V3.0, and share the same codes.
-Emakefun RF-Nano-Board integrates a NRF24L01+ module with for Arduino nano v3.0 board, which is very convenient for 2.4G wireless connect application.
-We used high quality PCB original material and Immersion Gold Technology to make sure every board has smooth edge and more reliable.
-The PCB size is only about 48mm*19mm, the pin is fully compatible with Nano V3.0, No Soldering needed. The micro usb port is more convenient to use.
Specification:
Microcontroller: ATmega328P
Nrf24L01+ 2.4G wireless
Architecture AVR
Operating Voltage: 5V
Flash Memory: 32 KB of which 2 KB used by bootloader
SRAM: 2 KB
Clock Speed: 16 MHz
Analog I/O Pins: 8
EEPROM: 1 KB
DC Current: per I/O Pins 40 mA (I/O Pins)
Input Voltage: 7-12 V
Digital I/O Pins: 22
PWM Output: 6
Power Consumption: 19 mA
PCB Size: about 48 x 18mm
Weight: about 10 g
Package includes:
1 * Nano Board
If you have any doubts or uncertainty about this item, contact us with no hesitation, we are always here and will solve your problems.
Thanks and wish you a nice
Sản Phẩm Liên Quan
HOT
Bikini hàng Âu
₫ 400.000
HOT
Bikini Thái quả ngang chấm bi
₫ 350.000
HOT
Bikini made in Thailand
₫ 350.000
HOT
Bikini Thái
₫ 300.000
HOT
Bikini OKISS- QCXK
₫ 400.000
HOT
Bikini xuất Âu
₫ 300.000