Bảng Mạch Mở Rộng V3 V4 Cho Bảng Mạch Arduino V3 A4988 Drv8825
₫ 110.800
Sản phẩm Bảng Mạch Mở Rộng V3 V4 Cho Bảng Mạch Arduino V3 A4988 Drv8825 đang được mở bán với mức giá siêu tốt khi mua online, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
V3 (picture 2 & 3)
===============
0.9 compatible. Grbl (open source firmware that runs on an uno that turns the g-code commands into stepper 37signals)
Pwm spindle and direction pins
4-axis support (x, y, z, a-can duplicate x, y z, or do a full 4th axis with custom firmware using pins d12 and d13)
2 x end stops for each axis (6 in total)
Coolant enable.
Uses removable a4988 or drv8825 compatible stepper drivers
Some drivers like the drv8825 can do up to 1 / 32 micro-stepping
Compact design.
Stepper motors can be connected with a molex connector or soldered 4 in place pin.
Runs on 12-36v dc.
V4 (picture 1)
=====================
Introduction
3d printer stepper motor driver cnc shield v4 needs to work with nano board.
It can be used as driver expansion board for engraving machines and 3d printingers.
It has in total 3 channel slots for a4988 stepper motor driver modules (not included)
For driving 3 channel of stepper motors. Each channel of stepper motor only needs 2 io ports,
Which means 6 io ports is sufficient to manage 3 stepper motors.
This shield can make quick work for managing stepper motors in your project.
Specification.
1. 3 axis stepper motor driver
2. Compatible with micro-drive laser engraving machine, three-axis cnc engraving machine,
3. 2a can be controlled within the two-phase four-wire stepper motor.
4. Released the digital io interface easy to connect to other modules such as endstop.
5. Released the i2c interface, you can connect to the lcd i2c or other i2c module.
6. Power dc5v interface, 7.5-12v voltage input.
7. Compatible grbl
8. Worked with
===============
0.9 compatible. Grbl (open source firmware that runs on an uno that turns the g-code commands into stepper 37signals)
Pwm spindle and direction pins
4-axis support (x, y, z, a-can duplicate x, y z, or do a full 4th axis with custom firmware using pins d12 and d13)
2 x end stops for each axis (6 in total)
Coolant enable.
Uses removable a4988 or drv8825 compatible stepper drivers
Some drivers like the drv8825 can do up to 1 / 32 micro-stepping
Compact design.
Stepper motors can be connected with a molex connector or soldered 4 in place pin.
Runs on 12-36v dc.
V4 (picture 1)
=====================
Introduction
3d printer stepper motor driver cnc shield v4 needs to work with nano board.
It can be used as driver expansion board for engraving machines and 3d printingers.
It has in total 3 channel slots for a4988 stepper motor driver modules (not included)
For driving 3 channel of stepper motors. Each channel of stepper motor only needs 2 io ports,
Which means 6 io ports is sufficient to manage 3 stepper motors.
This shield can make quick work for managing stepper motors in your project.
Specification.
1. 3 axis stepper motor driver
2. Compatible with micro-drive laser engraving machine, three-axis cnc engraving machine,
3. 2a can be controlled within the two-phase four-wire stepper motor.
4. Released the digital io interface easy to connect to other modules such as endstop.
5. Released the i2c interface, you can connect to the lcd i2c or other i2c module.
6. Power dc5v interface, 7.5-12v voltage input.
7. Compatible grbl
8. Worked with
Sản Phẩm Liên Quan
HOT
Bikini hàng Âu
₫ 400.000
HOT
Bikini Thái quả ngang chấm bi
₫ 350.000
HOT
Bikini made in Thailand
₫ 350.000
HOT
Bikini Thái
₫ 300.000
HOT
Bikini OKISS- QCXK
₫ 400.000
HOT
Bikini xuất Âu
₫ 300.000