Bảng Mạch Màn Hình Lcd 3.2 Inch Ili9341 Tft Cho Arduino
540.000
₫ 330.480
Sản phẩm Bảng Mạch Màn Hình Lcd 3.2 Inch Ili9341 Tft Cho Arduino đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 540.000 xuống còn ₫ 330.480, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
3.2 Inch ssd1289 TFT LCD Display Module Touch Panel For Arduino
Feature:
Wide viewing angle
LCD touch screen module
With ssd1289 Controller (Update in October 07, 2016)
Compatible 3.3V arduino
Specification:
Resolution ratio: 240 x 320
Size: 3.2 inch
Dimension: 9.4 x 6.1cm(L x W)
Instructions: Click to open
Note:
The control and driving circuit of TFT modules is low voltage and FRIDA micro-power CMOS circuit, can be easily damaged by static, static damage is an irreparable damage, and sometimes human have hundreds of volts of high voltage static electricity, therefore, in handling, assembling and use should be extremely careful to prevent static electricity:
1. Using soldering iron or power FRIDA tools must be well grounded and operation, make them without leakage;
2. Do not use hand to touch the leads, circuit boards and metal boxes;
3. Do not use a vacuum cleaner for cleaning, because it generates strong static electricity;
4.when the air is dry, can also generate static electricity, therefore, workshop humidity shall be above RH60%;
5. If it is necessary to direct contact it , should enable the human body in the same potential with the modules ,or make human body be well grounded;
6. remove or back in the bags or move locations, also need to be careful to prevent static electricity. Don't replace or discard the original packing.
Electrostatic damage or man-made damage is not within the scope of the warranty.
Package included:
1 x 3.2 inch TFT LCD display module touch
Feature:
Wide viewing angle
LCD touch screen module
With ssd1289 Controller (Update in October 07, 2016)
Compatible 3.3V arduino
Specification:
Resolution ratio: 240 x 320
Size: 3.2 inch
Dimension: 9.4 x 6.1cm(L x W)
Instructions: Click to open
Note:
The control and driving circuit of TFT modules is low voltage and FRIDA micro-power CMOS circuit, can be easily damaged by static, static damage is an irreparable damage, and sometimes human have hundreds of volts of high voltage static electricity, therefore, in handling, assembling and use should be extremely careful to prevent static electricity:
1. Using soldering iron or power FRIDA tools must be well grounded and operation, make them without leakage;
2. Do not use hand to touch the leads, circuit boards and metal boxes;
3. Do not use a vacuum cleaner for cleaning, because it generates strong static electricity;
4.when the air is dry, can also generate static electricity, therefore, workshop humidity shall be above RH60%;
5. If it is necessary to direct contact it , should enable the human body in the same potential with the modules ,or make human body be well grounded;
6. remove or back in the bags or move locations, also need to be careful to prevent static electricity. Don't replace or discard the original packing.
Electrostatic damage or man-made damage is not within the scope of the warranty.
Package included:
1 x 3.2 inch TFT LCD display module touch