Bảng mạch khuếch đại âm thanh điện tử 1969 Class A Pcb 2.0 chất lượng cao
437.000
₫ 366.000
Sản phẩm Bảng mạch khuếch đại âm thanh điện tử 1969 Class A Pcb 2.0 chất lượng cao đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 437.000 xuống còn ₫ 366.000, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Description:
Two M3 screw holes are specially designed on the bottom of the heat sink to fix the amplifier in the chassis, which is not only firm but also more conducive to heat dissipation.
The motherboard supports TIP41C and TTC5200 output power tubes respectively, and supports both horizontal and vertical installation methods.
All famous brand capacitor and transistor, FR-4 good PCB, easy to solder and long life,it is still beneficial to sound quality.
1969 is a more powerful power amplifier, very special current negative feedback circuit, unlike common voltage feedback, no high frequency compensation, wide frequency response, and very high stability.
Tips: It is diy kit,need assemble to work.Please take full consideration to buy.
Specification:
Product name: Amplifier board kit
Color: Blue+ blue
Material: Metal + plastic
Size: (About)13.1 x 5.0 x 2.3cm
Debugging method:
1. Pre-adjust the on-line resistance of the quiescent current adjustment potentiometer before power-on is about 930 ohms. This is also our recommended working current.
The fans can also adjust to their favorite position. The higher the current, the more heat is generated;
2. Then power-on adjustment of the key potentiometer, and test the ground voltage of the two midpoint test voltage points, until half of the power supply voltage, replace the use of different power supplies, it is recommended to readjust the midpoint voltage;
3. Quiescent current regulation can also be carried out by using the circuit in series with the ammeter, which will be more accurate;
4. When power-on debugging, please be careful, do not touch the pen tip of the multimeter, so as not to damage it!
Package included:
1PC *Amplifier board kit
Note:
Transition: 1cm=10mm=0.39inch
1. Due to the light and screen difference, the item's color may be slightly different from the pictures.
2. Please allow 0.5-2 cm differences due to manual measurement.
#Amplifier #Board #Kit #High #Fidelity #DIY #2.0 #Channel #PCB #Full #Range #Assembled #Audio #Heatsinks #Compo
Two M3 screw holes are specially designed on the bottom of the heat sink to fix the amplifier in the chassis, which is not only firm but also more conducive to heat dissipation.
The motherboard supports TIP41C and TTC5200 output power tubes respectively, and supports both horizontal and vertical installation methods.
All famous brand capacitor and transistor, FR-4 good PCB, easy to solder and long life,it is still beneficial to sound quality.
1969 is a more powerful power amplifier, very special current negative feedback circuit, unlike common voltage feedback, no high frequency compensation, wide frequency response, and very high stability.
Tips: It is diy kit,need assemble to work.Please take full consideration to buy.
Specification:
Product name: Amplifier board kit
Color: Blue+ blue
Material: Metal + plastic
Size: (About)13.1 x 5.0 x 2.3cm
Debugging method:
1. Pre-adjust the on-line resistance of the quiescent current adjustment potentiometer before power-on is about 930 ohms. This is also our recommended working current.
The fans can also adjust to their favorite position. The higher the current, the more heat is generated;
2. Then power-on adjustment of the key potentiometer, and test the ground voltage of the two midpoint test voltage points, until half of the power supply voltage, replace the use of different power supplies, it is recommended to readjust the midpoint voltage;
3. Quiescent current regulation can also be carried out by using the circuit in series with the ammeter, which will be more accurate;
4. When power-on debugging, please be careful, do not touch the pen tip of the multimeter, so as not to damage it!
Package included:
1PC *Amplifier board kit
Note:
Transition: 1cm=10mm=0.39inch
1. Due to the light and screen difference, the item's color may be slightly different from the pictures.
2. Please allow 0.5-2 cm differences due to manual measurement.
#Amplifier #Board #Kit #High #Fidelity #DIY #2.0 #Channel #PCB #Full #Range #Assembled #Audio #Heatsinks #Compo
Sản Phẩm Liên Quan
HOT
Dây điện đôi màu đỏ đen loại nhỏ
₫ 1.500
HOT
Củ Sạc 3 Cổng USB 3.1A Nhiều Màu
₫ 12.900