Bảng mạch đo tần số B HOED/Gat Plaat tự ráp cho Raspberry Pi 3 kèm phụ kiện
₫ 44.000
Sản phẩm Bảng mạch đo tần số B HOED/Gat Plaat tự ráp cho Raspberry Pi 3 kèm phụ kiện đang được mở bán với mức giá siêu tốt khi mua online, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
For Raspberry Pi 2 model B prototyping board, compatible with A + / B +.
0.1 inch (2.54mm) prototype chip resistors LED, potentiometer, etc.
+ 3 V, 5 V + and GND hole
Add a chip such as EEPROM may SO8
Design Your Own Expansion, Highly Customized Circuit to Dress Up Your Personal PI 2, A +, B +
Using 0.1inch (2.54mm) prototype welding hole connection chip, resistance, LED, potentiometer and so on.
All holes, imitate the familiar breadboard connection, easy to use.
There are long bars for the +3 V, +5 V and the ground connection line.
It comes with a printed circuit board and a 2 x 20 gold-plated female header, mounted on the top of your raspberry pie (like a cute little hat ...)
This version does not come with EEPROM, so you do not need to worry about EEPROM address conflicts.
You can use the standard 2 x 20 row female.
This HAT Shields is only compatible with Raspberry Pi A +, B + or PI 2!
It will not support Raspberry Pi A and Raspberry Pi B.
Can install ID: EEPROM, Official Foundation Tutorial: https://github.com/raspberrypi/hats
Package Contents:
1 x HAT-tunnel panel
1 x 2 * 20 high-ranked female
4 x Screw
4 x Nuts
4 x pillars
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1
0.1 inch (2.54mm) prototype chip resistors LED, potentiometer, etc.
+ 3 V, 5 V + and GND hole
Add a chip such as EEPROM may SO8
Design Your Own Expansion, Highly Customized Circuit to Dress Up Your Personal PI 2, A +, B +
Using 0.1inch (2.54mm) prototype welding hole connection chip, resistance, LED, potentiometer and so on.
All holes, imitate the familiar breadboard connection, easy to use.
There are long bars for the +3 V, +5 V and the ground connection line.
It comes with a printed circuit board and a 2 x 20 gold-plated female header, mounted on the top of your raspberry pie (like a cute little hat ...)
This version does not come with EEPROM, so you do not need to worry about EEPROM address conflicts.
You can use the standard 2 x 20 row female.
This HAT Shields is only compatible with Raspberry Pi A +, B + or PI 2!
It will not support Raspberry Pi A and Raspberry Pi B.
Can install ID: EEPROM, Official Foundation Tutorial: https://github.com/raspberrypi/hats
Package Contents:
1 x HAT-tunnel panel
1 x 2 * 20 high-ranked female
4 x Screw
4 x Nuts
4 x pillars
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1
Sản Phẩm Liên Quan
HOT
Bikini hàng Âu
₫ 400.000
HOT
Bikini Thái quả ngang chấm bi
₫ 350.000
HOT
Bikini made in Thailand
₫ 350.000
HOT
Bikini Thái
₫ 300.000
HOT
Bikini OKISS- QCXK
₫ 400.000
HOT
Bikini xuất Âu
₫ 300.000