Bảng Mạch Digispark Attiny85 Mini Usb At Tiny85 Micro
₫ 65.700
Sản phẩm Bảng Mạch Digispark Attiny85 Mini Usb At Tiny85 Micro đang được mở bán với mức giá siêu tốt khi mua online, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Digispark attiny85 is an attiny85 microcontroller development board similar to arduino, Just cheaper., Smaller., And it 's a little less powerful because it' s attiny85 based.
With a large amount of protection to expand its functionality and the ability to use arduino 's idea to program it, Digispark attiny85 is the best option and is suitable for situations where a arduino is too large or too expensive for a small project-project.
Xxspecification:
Support for the arduino ide 1.0 + (osx / win / linux)
Power via usb or external source - 5v or 7-35v (automatic selection)
On-board 500ma 5v regulator
Built-in usb (and serial debugging)
6 i / o pins (2 are used for usb only if your program activated communications over usb otherwise you can use all 6 even if you are programming via usb)
8k flash memory about 6k after bootloader
I2c and spi.
Pwm on 3 pins (more possible with pwm software)
Adc on 4 pins.
Power led and test / status led (on pin0)
Size: 26.8x19.3mm
"Complications:
- controller.
- smarthome.
- bluetooth control
- oled control.
- arduino replace
With a large amount of protection to expand its functionality and the ability to use arduino 's idea to program it, Digispark attiny85 is the best option and is suitable for situations where a arduino is too large or too expensive for a small project-project.
Xxspecification:
Support for the arduino ide 1.0 + (osx / win / linux)
Power via usb or external source - 5v or 7-35v (automatic selection)
On-board 500ma 5v regulator
Built-in usb (and serial debugging)
6 i / o pins (2 are used for usb only if your program activated communications over usb otherwise you can use all 6 even if you are programming via usb)
8k flash memory about 6k after bootloader
I2c and spi.
Pwm on 3 pins (more possible with pwm software)
Adc on 4 pins.
Power led and test / status led (on pin0)
Size: 26.8x19.3mm
"Complications:
- controller.
- smarthome.
- bluetooth control
- oled control.
- arduino replace