Bảng Mạch Digispark Attiny85 Arduino Với Cổng Usb
₫ 78.700
Sản phẩm Bảng Mạch Digispark Attiny85 Arduino Với Cổng Usb đang được mở bán với mức giá siêu tốt khi mua online, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Digispark attiny85 miniatures arduino board usb
Xthis is not the ori board of digisparkx it was developed opensource
The attiny85-based arduino can be programd using arduino ide (follow the tutorial below to add the board). Because of the limited size and cost of the economy, of course this board is not ' match ' arduino 's board is generally (which uses avr atmega)
Specs:
Support arduino ide 1.0 + (osx / win / linux)
Power via usb or external source 7-12v
5v 500ma on-board regulator
Usb built-in pcb
I / o: 6 i / o pins (2 are used for usb only if your program activity communications over usb)
Flash: 8k flash memory about 6k after bootloader
All pins can be used as digital i / o
Pin 0 i2c sda, pwm
Pwm 1 pin (onboard led)
2 i2c sck pin, analog in.
3 in (also used for usb + when usb is in use)
Pwm 4 pin, analog (also used for usb-when usb is in use)
5 analog in pin
- link downloading driver:
https://github•com/digistump/DigistumpArduino/r...
- tutorial to add his board to arduino 's idea:
http://digistump•com/wiki/digispark/tutorials/
Xthis is not the ori board of digisparkx it was developed opensource
The attiny85-based arduino can be programd using arduino ide (follow the tutorial below to add the board). Because of the limited size and cost of the economy, of course this board is not ' match ' arduino 's board is generally (which uses avr atmega)
Specs:
Support arduino ide 1.0 + (osx / win / linux)
Power via usb or external source 7-12v
5v 500ma on-board regulator
Usb built-in pcb
I / o: 6 i / o pins (2 are used for usb only if your program activity communications over usb)
Flash: 8k flash memory about 6k after bootloader
All pins can be used as digital i / o
Pin 0 i2c sda, pwm
Pwm 1 pin (onboard led)
2 i2c sck pin, analog in.
3 in (also used for usb + when usb is in use)
Pwm 4 pin, analog (also used for usb-when usb is in use)
5 analog in pin
- link downloading driver:
https://github•com/digistump/DigistumpArduino/r...
- tutorial to add his board to arduino 's idea:
http://digistump•com/wiki/digispark/tutorials/
Sản Phẩm Liên Quan
HOT
Bikini hàng Âu
₫ 400.000
HOT
Bikini Thái quả ngang chấm bi
₫ 350.000
HOT
Bikini made in Thailand
₫ 350.000
HOT
Bikini Thái
₫ 300.000
HOT
Bikini OKISS- QCXK
₫ 400.000
HOT
Bikini xuất Âu
₫ 300.000