Bảng Mạch Điều Khiển Tốc Độ Quạt Tản Nhiệt Pwm 4 Dây
89.538
₫ 59.900
Sản phẩm Bảng Mạch Điều Khiển Tốc Độ Quạt Tản Nhiệt Pwm 4 Dây đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 89.538 xuống còn ₫ 59.900, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Package: 1 piece of PWM fan thermostat
The product will be upgraded constantly, the appearance and color may be changed, please don't mind. And take a consideration before place the order if you have request for color or appearance.
Parameters:
Circuit board size: length 50mm * 43mm * 13mm,
Fixed particle hole position: 44mm*37mm,
Diameter: 3mm
Working voltage: DC12V
Circuit load capacity: each output maximum current 5A, total current up to 9A
Function setting switch description:
TFL (No. 1): The lowest PWM setting of the temperature control channel, the lowest PWM of FAN1 is 40% in the ON state, and the lowest PWM of FAN1 is 20% in the OFF state.
TP1 TP2 (No. 2, 3): The temperature control channel controls the temperature zone, the specific settings are as follows (it needs to be used with a temperature probe):
TP1 TP2 Accelerating temperature Full speed temperature
OFF OFF 35℃ 45℃
ON OFF 40℃ 55℃
OFF ON 50℃ 70℃
ON ON 60℃ 90℃
If the temperature is lower than the acceleration temperature, the output will be at the lowest speed, and if the temperature exceeds the full speed, the output will always be at full speed.
BF1 BF2 (No. 4, 5): Corresponding to the FAN1 FAN2 stop alarm function switch, when the corresponding is turned on, the channel fan fails and stops, the controller will sound (need to be equipped with a buzzer) and light alarm, and the fan will resume rotation The alarm is automatically eliminated. If both BF1 and BF2 are turned on (ON), any one or both of FAN1 and FAN2 will stop, and the controller will alarm!
Parameters:
Circuit board size: length, width and height 50mm*43mm*13mm,
Positioning hole position: 44mm*37mm,
Diameter: 3mm
Working voltage: DC12V
Circuit load capacity: the maximum output current of each channel is 5A, and the maximum bus current is 9A
Output range: the first channel 20%-100% or 40%-100% (TFL=ON)
The second and third channels 10%-100%
Note:
The above range is only the PWM range, the actual fan control effect will vary according to different fans.
Temperature probe parameters: 50K B=3950
Temperature control temperature zone error: according to the temperature probe error, generally 3-5%
Minimum speed for stall alarm: 700-80
The product will be upgraded constantly, the appearance and color may be changed, please don't mind. And take a consideration before place the order if you have request for color or appearance.
Parameters:
Circuit board size: length 50mm * 43mm * 13mm,
Fixed particle hole position: 44mm*37mm,
Diameter: 3mm
Working voltage: DC12V
Circuit load capacity: each output maximum current 5A, total current up to 9A
Function setting switch description:
TFL (No. 1): The lowest PWM setting of the temperature control channel, the lowest PWM of FAN1 is 40% in the ON state, and the lowest PWM of FAN1 is 20% in the OFF state.
TP1 TP2 (No. 2, 3): The temperature control channel controls the temperature zone, the specific settings are as follows (it needs to be used with a temperature probe):
TP1 TP2 Accelerating temperature Full speed temperature
OFF OFF 35℃ 45℃
ON OFF 40℃ 55℃
OFF ON 50℃ 70℃
ON ON 60℃ 90℃
If the temperature is lower than the acceleration temperature, the output will be at the lowest speed, and if the temperature exceeds the full speed, the output will always be at full speed.
BF1 BF2 (No. 4, 5): Corresponding to the FAN1 FAN2 stop alarm function switch, when the corresponding is turned on, the channel fan fails and stops, the controller will sound (need to be equipped with a buzzer) and light alarm, and the fan will resume rotation The alarm is automatically eliminated. If both BF1 and BF2 are turned on (ON), any one or both of FAN1 and FAN2 will stop, and the controller will alarm!
Parameters:
Circuit board size: length, width and height 50mm*43mm*13mm,
Positioning hole position: 44mm*37mm,
Diameter: 3mm
Working voltage: DC12V
Circuit load capacity: the maximum output current of each channel is 5A, and the maximum bus current is 9A
Output range: the first channel 20%-100% or 40%-100% (TFL=ON)
The second and third channels 10%-100%
Note:
The above range is only the PWM range, the actual fan control effect will vary according to different fans.
Temperature probe parameters: 50K B=3950
Temperature control temperature zone error: according to the temperature probe error, generally 3-5%
Minimum speed for stall alarm: 700-80
Sản Phẩm Liên Quan
HOT
Bikini hàng Âu
₫ 400.000
HOT
Bikini Thái quả ngang chấm bi
₫ 350.000
HOT
Bikini made in Thailand
₫ 350.000
HOT
Bikini Thái
₫ 300.000
HOT
Bikini OKISS- QCXK
₫ 400.000
HOT
Bikini xuất Âu
₫ 300.000