Bảng Mạch Điều Khiển Tốc Độ Động Cơ Bước Pwm
365.000
₫ 190.000
Sản phẩm Bảng Mạch Điều Khiển Tốc Độ Động Cơ Bước Pwm đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 365.000 xuống còn ₫ 190.000, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Welcome to our shop, we provide high-quality and inexpensive
Descriptions:
1. This module is a pulse generating module, which supplies stepping driver as signal. If you want to control the stepper motor, you must also have a motor driver.Frequency measurement: PUL and GND ports can be measured.
2. PUL+and PUL-are positive and negative of the pulse; EN+and EN-are positive and negative of the enabler; DIR+and DIR-are positive and negative of the direction. The six lines are connected to the six ports of the driver corresponding to the pulse, direction and enablement respectively. Note that the ENA enabler on the controller must be connected to the driver in both positive and negative ways if the function of turn-on or stop is to be used.
3. 2 groups of power input, 2 groups only need to connect to one group of power supply.One group is connected to DC 15-160VDC.The other group was 5-12 VDC. If it is powered by 5-12VDC, the power supply is positively connected to "5-12V in", and the power supply is negatively connected to "common negative end".
Specifications:
Power supply voltage: 15-160V/5-12V
Frequency: high: 5.8KHZ-127KHZ, medium: 590HZ-15.8KHZ, low: 82HZ-2.3KHZ
Quantity: 1pc
Product size: 73*51*37mm/2.87*2.01*1.46"
Material: plastic
Note:
If you use start or stop functions, ENA controller enabled terminals must be connected to common cathode or common anode drives.
Notes:
1. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
2. Please allow slight measuring deviation due to manual measurement.
Included:
1 XPWM Pulse Signal Gene
Descriptions:
1. This module is a pulse generating module, which supplies stepping driver as signal. If you want to control the stepper motor, you must also have a motor driver.Frequency measurement: PUL and GND ports can be measured.
2. PUL+and PUL-are positive and negative of the pulse; EN+and EN-are positive and negative of the enabler; DIR+and DIR-are positive and negative of the direction. The six lines are connected to the six ports of the driver corresponding to the pulse, direction and enablement respectively. Note that the ENA enabler on the controller must be connected to the driver in both positive and negative ways if the function of turn-on or stop is to be used.
3. 2 groups of power input, 2 groups only need to connect to one group of power supply.One group is connected to DC 15-160VDC.The other group was 5-12 VDC. If it is powered by 5-12VDC, the power supply is positively connected to "5-12V in", and the power supply is negatively connected to "common negative end".
Specifications:
Power supply voltage: 15-160V/5-12V
Frequency: high: 5.8KHZ-127KHZ, medium: 590HZ-15.8KHZ, low: 82HZ-2.3KHZ
Quantity: 1pc
Product size: 73*51*37mm/2.87*2.01*1.46"
Material: plastic
Note:
If you use start or stop functions, ENA controller enabled terminals must be connected to common cathode or common anode drives.
Notes:
1. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
2. Please allow slight measuring deviation due to manual measurement.
Included:
1 XPWM Pulse Signal Gene
Sản Phẩm Liên Quan
HOT
Bikini hàng Âu
₫ 400.000
HOT
Bikini Thái quả ngang chấm bi
₫ 350.000
HOT
Bikini made in Thailand
₫ 350.000
HOT
Bikini Thái
₫ 300.000
HOT
Bikini OKISS- QCXK
₫ 400.000
HOT
Bikini xuất Âu
₫ 300.000