Bảng Mạch Điều Khiển Sạc Pin Tự Động M603 12~24v
164.900
₫ 96.800
Sản phẩm Bảng Mạch Điều Khiển Sạc Pin Tự Động M603 12~24v đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 164.900 xuống còn ₫ 96.800, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
❤Welcome to Cancanshop Store!❤
✔Ready to sent✔Good quality✔Best price
Follow us, promotion and new arrival every day in our shop❤
---------------------- ❤Product Introduction ❤-----------------------
Feature:
-Press once to display the starting voltage, long press the number to flash, and then set the starting voltage value through the start and stop buttons
-Press once to display the stop voltage, long press the number to flash, and then set the stop voltage value through the start and stop buttons
-When the start/stop button is pressed in the power‐on state, the digital tube will display 888, which means the factory reset setting.
-When it is detected that the battery voltage exceeds 14.4V, the relay will cut off the charger to charge.
-Energy saving and can extend the life of the battery to prevent overcharging.
Specification:
Item Type: Battery Charging Control ModuleMaterial: PCB
Purpose: Automatic switch protection for battery charging
Input Voltage: DC 10-30V
Display Accuracy: 0.1V
Control Accuracy: 0.1V
Output Type: Direct output
Voltage Error: ±-0.1V
Range of Use: 12-24V various storage batteries
Product Size: Approx. 82 x 58 x 18mm / 3.2 x 2.3 x 0.7in
Package List:
1 x Battery Charging Control M
✔Ready to sent✔Good quality✔Best price
Follow us, promotion and new arrival every day in our shop❤
---------------------- ❤Product Introduction ❤-----------------------
Feature:
-Press once to display the starting voltage, long press the number to flash, and then set the starting voltage value through the start and stop buttons
-Press once to display the stop voltage, long press the number to flash, and then set the stop voltage value through the start and stop buttons
-When the start/stop button is pressed in the power‐on state, the digital tube will display 888, which means the factory reset setting.
-When it is detected that the battery voltage exceeds 14.4V, the relay will cut off the charger to charge.
-Energy saving and can extend the life of the battery to prevent overcharging.
Specification:
Item Type: Battery Charging Control ModuleMaterial: PCB
Purpose: Automatic switch protection for battery charging
Input Voltage: DC 10-30V
Display Accuracy: 0.1V
Control Accuracy: 0.1V
Output Type: Direct output
Voltage Error: ±-0.1V
Range of Use: 12-24V various storage batteries
Product Size: Approx. 82 x 58 x 18mm / 3.2 x 2.3 x 0.7in
Package List:
1 x Battery Charging Control M