Bảng Mạch Điều Khiển Sạc Pin Tự Động 12v Cao Cấp
115.000
₫ 71.900
Sản phẩm Bảng Mạch Điều Khiển Sạc Pin Tự Động 12v Cao Cấp đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 115.000 xuống còn ₫ 71.900, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Description:
12 V automatic charging power control protection board will automatically charge when the battery voltage drop to about 10.5 V (low voltage adjustable) , and shut off when the power is about 14.4 V (adjustable). Red light on when charging, off when fully charged. Relay disconnect and 220 V input end charging, thereby save energy.
Features:
1, Assembled with special voltage control IC and special automobile relay.
2, Small volume and large current.
3, Voltage shutoff accurate and stable.
4, Complete functions and reliable performance.
5, Automatically charge and shut off.
Instruction:
Connect any wire of 220 V with the COM port of relay, and connect charger with OFF port.
The charger must be full bridge rectified output.
The DC output voltage can be between 13.8 and 14.8 V.
Charging test for the first time: battery voltage should be about 10 V.
Function 1: Current cannot be larger than 10 A.
Function 2: The board has reverse connect protection function. There is no output if no battery is connected. No output if the polarity of battery is wrong.
Output short circuit automatically shut down: It is a practical protection. As long as the output short circuit, the charger will automatically shut down output, so protect the charger from burning.
Adjustment:
VR1 relay disconnected to shutoff when battery charging voltage to 14.4 V. (shutoff voltage setting: clockwise lower, counterclockwise higher)
VR2 relay connected and began to charge when battery voltage is 10.5 V(low voltage setting: clockwise lower, counterclockwise higher)
Specifications:
Default Value:
Low Voltage: 10.5V
Shutoff Voltage: 14.8 V (adjustable, might be different)
Wiring Method: Please wire according to instruction. Do not change wiring
Size of PCB: 55x33mm/2.17x1.30"
Quantity: 1 Pc
Note:
1, Users need electric knowledge to use this item, please make sure you know how to use it before you buy. Thanks for your understanding.
2, Please allow 1-3 mm error due to manual measurement. Thanks for your understanding.
3, Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard
Package includes:
1 x Charging Control
12 V automatic charging power control protection board will automatically charge when the battery voltage drop to about 10.5 V (low voltage adjustable) , and shut off when the power is about 14.4 V (adjustable). Red light on when charging, off when fully charged. Relay disconnect and 220 V input end charging, thereby save energy.
Features:
1, Assembled with special voltage control IC and special automobile relay.
2, Small volume and large current.
3, Voltage shutoff accurate and stable.
4, Complete functions and reliable performance.
5, Automatically charge and shut off.
Instruction:
Connect any wire of 220 V with the COM port of relay, and connect charger with OFF port.
The charger must be full bridge rectified output.
The DC output voltage can be between 13.8 and 14.8 V.
Charging test for the first time: battery voltage should be about 10 V.
Function 1: Current cannot be larger than 10 A.
Function 2: The board has reverse connect protection function. There is no output if no battery is connected. No output if the polarity of battery is wrong.
Output short circuit automatically shut down: It is a practical protection. As long as the output short circuit, the charger will automatically shut down output, so protect the charger from burning.
Adjustment:
VR1 relay disconnected to shutoff when battery charging voltage to 14.4 V. (shutoff voltage setting: clockwise lower, counterclockwise higher)
VR2 relay connected and began to charge when battery voltage is 10.5 V(low voltage setting: clockwise lower, counterclockwise higher)
Specifications:
Default Value:
Low Voltage: 10.5V
Shutoff Voltage: 14.8 V (adjustable, might be different)
Wiring Method: Please wire according to instruction. Do not change wiring
Size of PCB: 55x33mm/2.17x1.30"
Quantity: 1 Pc
Note:
1, Users need electric knowledge to use this item, please make sure you know how to use it before you buy. Thanks for your understanding.
2, Please allow 1-3 mm error due to manual measurement. Thanks for your understanding.
3, Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard
Package includes:
1 x Charging Control
Sản Phẩm Liên Quan
HOT
Bikini hàng Âu
₫ 400.000
HOT
Bikini Thái quả ngang chấm bi
₫ 350.000
HOT
Bikini made in Thailand
₫ 350.000
HOT
Bikini Thái
₫ 300.000
HOT
Bikini OKISS- QCXK
₫ 400.000
HOT
Bikini xuất Âu
₫ 300.000