Bảng Mạch Điều Khiển Nhiệt Độ Xh-M452 Dc 12v Led
487.000
₫ 341.000
Sản phẩm Bảng Mạch Điều Khiển Nhiệt Độ Xh-M452 Dc 12v Led đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 487.000 xuống còn ₫ 341.000, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Application scenario: control cabinet constant temperature and humidity control, incubation and breeding temperature control, printing plant.The two relays are separately controlled, one way to control the temperature, another way to control the humidity.
If you do wrong operation ,it will return to detect temperature display automatically after 5 seconds.Set the temperature-: Normal display e, long press-button for 3 seconds, stop numerical flashing temperature, press the + /-key to set value. Restore the factory Settings: At the same time long press temperature, and humidity + key for 3 seconds, digital display, 888, 888.
Setting essentials: start temperature Less than stop temperature (the program automatically determines that the working e is heating e); Setting essentials: start temperature Greater than stop temperature (the program automatically determines that the working e is cooling e)
Setting method: Set [Start-up temperature]: Long press the "+" button, the start-up temperature flashes, and set the start-up temperature value through the +/- button; Set [Stop temperature]: Long press the "-" button to stop the temperature flashing, and set the stop temperature value through the +/- button
Used in the breeding farm, the fan ventilation stops at 26℃, and the temperature rises to 30℃ to start ventilation again. 1: Refrigeration working e, start temperature Greater than stop temperature. 2: Long press the "+" button, the start temperature flashes, and set the start temperature to 30℃ through the +/- button.3: Long press the adjust button to stop the temperature flashing, and set the stop temperature to 65°C through the up and down keys, and the setting is complete!
Product el: XH-M452
Power supply voltage: DC12V
Temperature measurement range -20℃-60℃
Humidity range 00%~100%RH
Control accuracy: 0.1°C 0.1%RH
Detection probe: integrated sensor
Output type: relay output
Output capacity: maximum 10A
Product weight: about 69g (including sensor)
Appearance size: 65 x 55 x 28 mm
1 Hot use case: Control the water heater, stop heating to 65℃, and start heating again when the temperature drops to 50℃. The first step: heating working e, start temperature Less than stop temperature
Step 2: Long press the up button, the start temperature flashes, and set the start temperature to 50℃ through the up and down keys
size:65 x 55x28mm
Material:PCB+plastic
colour:Blue+ Black
Package Contents:
1 x temperature and humidity controller
1 x sensor
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1
If you do wrong operation ,it will return to detect temperature display automatically after 5 seconds.Set the temperature-: Normal display e, long press-button for 3 seconds, stop numerical flashing temperature, press the + /-key to set value. Restore the factory Settings: At the same time long press temperature, and humidity + key for 3 seconds, digital display, 888, 888.
Setting essentials: start temperature Less than stop temperature (the program automatically determines that the working e is heating e); Setting essentials: start temperature Greater than stop temperature (the program automatically determines that the working e is cooling e)
Setting method: Set [Start-up temperature]: Long press the "+" button, the start-up temperature flashes, and set the start-up temperature value through the +/- button; Set [Stop temperature]: Long press the "-" button to stop the temperature flashing, and set the stop temperature value through the +/- button
Used in the breeding farm, the fan ventilation stops at 26℃, and the temperature rises to 30℃ to start ventilation again. 1: Refrigeration working e, start temperature Greater than stop temperature. 2: Long press the "+" button, the start temperature flashes, and set the start temperature to 30℃ through the +/- button.3: Long press the adjust button to stop the temperature flashing, and set the stop temperature to 65°C through the up and down keys, and the setting is complete!
Product el: XH-M452
Power supply voltage: DC12V
Temperature measurement range -20℃-60℃
Humidity range 00%~100%RH
Control accuracy: 0.1°C 0.1%RH
Detection probe: integrated sensor
Output type: relay output
Output capacity: maximum 10A
Product weight: about 69g (including sensor)
Appearance size: 65 x 55 x 28 mm
1 Hot use case: Control the water heater, stop heating to 65℃, and start heating again when the temperature drops to 50℃. The first step: heating working e, start temperature Less than stop temperature
Step 2: Long press the up button, the start temperature flashes, and set the start temperature to 50℃ through the up and down keys
size:65 x 55x28mm
Material:PCB+plastic
colour:Blue+ Black
Package Contents:
1 x temperature and humidity controller
1 x sensor
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1