Bảng Mạch Điều Khiển Động Cơ Bước Fizasu17 Cnc Shield Arduino Uno + 4 Động Cơ Bước A4988
₫ 355.400
Sản phẩm Bảng Mạch Điều Khiển Động Cơ Bước Fizasu17 Cnc Shield Arduino Uno + 4 Động Cơ Bước A4988 đang được mở bán với mức giá siêu tốt khi mua online, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Welcome to our store:)
Cnc shield board:
Version: 3.0
- red.
Size (lxwxh): 68x53 x 18mm
Voltage: Dc 12~36 v (At the moment only the drv8825 drivers can handle up to 36v so please consider the operation voltage when powering the board.)
Features:
Uses removable a4988 or drv8825 compatible stepper drivers.
- the extension board can be used for carving machine, 3 d printer driver expansion board
- pwm spindle and direction pins, 4-axis support (X, y, z, a-can duplicate x,y,z or do a full 4th axis with custom firmware using pins d12 and d13)
Compact design. Stepper motors can be connected with 4 pin molex connectors or soldered in place.
Please note that this is an unassembled kit and basic soldering skills are needed.
A4988 stepper motor driver:
- red.
Size (lxwxh): 20x15 x 10mm
Thermal shutdown circuitry: Yes
Crossover-current protection yes
Ground fault protection yes
Load short-circuit protection yes
Compatible logic supply: 3.3v and 5v
Five selectable step modes: Full, 1 / 2, 1 / 4, 1 / 8 and 1 / 16
Features:
Mix with slow current decay modes.
- internal uvlo and low rds output.
- automatic current decay mode detection.
Synchronous rectification for low power dissipation.
Warning: Connecting or disconnecting a stepper motor while the driver is powered can destroy the driver.
Package inclusions:
1 x engraver cnc shield board
4 x a4988 stepper motor driver please ask stock first:)
Thank you for shopping in our store.
Fiza
Cnc shield board:
Version: 3.0
- red.
Size (lxwxh): 68x53 x 18mm
Voltage: Dc 12~36 v (At the moment only the drv8825 drivers can handle up to 36v so please consider the operation voltage when powering the board.)
Features:
Uses removable a4988 or drv8825 compatible stepper drivers.
- the extension board can be used for carving machine, 3 d printer driver expansion board
- pwm spindle and direction pins, 4-axis support (X, y, z, a-can duplicate x,y,z or do a full 4th axis with custom firmware using pins d12 and d13)
Compact design. Stepper motors can be connected with 4 pin molex connectors or soldered in place.
Please note that this is an unassembled kit and basic soldering skills are needed.
A4988 stepper motor driver:
- red.
Size (lxwxh): 20x15 x 10mm
Thermal shutdown circuitry: Yes
Crossover-current protection yes
Ground fault protection yes
Load short-circuit protection yes
Compatible logic supply: 3.3v and 5v
Five selectable step modes: Full, 1 / 2, 1 / 4, 1 / 8 and 1 / 16
Features:
Mix with slow current decay modes.
- internal uvlo and low rds output.
- automatic current decay mode detection.
Synchronous rectification for low power dissipation.
Warning: Connecting or disconnecting a stepper motor while the driver is powered can destroy the driver.
Package inclusions:
1 x engraver cnc shield board
4 x a4988 stepper motor driver please ask stock first:)
Thank you for shopping in our store.
Fiza
Sản Phẩm Liên Quan
HOT
Bikini hàng Âu
₫ 400.000
HOT
Bikini Thái quả ngang chấm bi
₫ 350.000
HOT
Bikini made in Thailand
₫ 350.000
HOT
Bikini Thái
₫ 300.000
HOT
Bikini OKISS- QCXK
₫ 400.000
HOT
Bikini xuất Âu
₫ 300.000