Bảng Mạch Điều Khiển Bay Teenyf4 Pro F4 Mpu6000 16x16mm Cho Drone
₫ 745.000
Sản phẩm Bảng Mạch Điều Khiển Bay Teenyf4 Pro F4 Mpu6000 16x16mm Cho Drone đang được mở bán với mức giá siêu tốt khi mua online, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
16x16mm TeenyF4 Pro F4 Flight Controller w/ Betalflight OSD & Buck-Boost Converter for Micro FPV Racing Drone
Specification:
Item Name: Omnibus F4 FC Integrated with Betaflight OSD
Model: TeenyF4 Pro
Processor: STM32F405RGT6
Sensor: MPU-6000 (connected by SPI)
Firmware version: betaflight_3.2.0_OMNIBUSF4SD
Input Voltage: 1-2S Lipo
Size: 20*20mm
Mounting Hole: 16*16mm
Mount Hole Diameter: 2mm
Weight: 2.2g
- Built-in Buck-Boost Converter
- Receiver: PPM, IBUS, SBUS, DSM2, DSMX etc.
- Suitable for Micro FPV brushless frame
Features:
-Support programmable LED Strip (turn off transponder before using)
-Support BLheli/BLHELI_S suite Pass-through ready
-Support PPM,Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600
-Support the newest DSHOT ESC
-Built-in voltage detection, alarm
-Built-in Betaflight-OSD , Configure by Betaflight GUI
-Buzzer Ready (Solder pin)
-LED_STRIP Ready (Solder pin)
Setting Notice:
- SBUS/IBUS/DSMX receiver please configure RX1 (UART1) as input, and enable Serial_RX
- PPM receiver don’t need to enable Serial_RX
- DSM/DSM2/DSMX receiver power from 3.3V
- SBUS and PPM receiver power from 5V
Package Included:
1x TeenyF4 Pro flight controller board
4x M2*5+5 Nylon column
4x M2 Nuts
4x M2
Specification:
Item Name: Omnibus F4 FC Integrated with Betaflight OSD
Model: TeenyF4 Pro
Processor: STM32F405RGT6
Sensor: MPU-6000 (connected by SPI)
Firmware version: betaflight_3.2.0_OMNIBUSF4SD
Input Voltage: 1-2S Lipo
Size: 20*20mm
Mounting Hole: 16*16mm
Mount Hole Diameter: 2mm
Weight: 2.2g
- Built-in Buck-Boost Converter
- Receiver: PPM, IBUS, SBUS, DSM2, DSMX etc.
- Suitable for Micro FPV brushless frame
Features:
-Support programmable LED Strip (turn off transponder before using)
-Support BLheli/BLHELI_S suite Pass-through ready
-Support PPM,Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600
-Support the newest DSHOT ESC
-Built-in voltage detection, alarm
-Built-in Betaflight-OSD , Configure by Betaflight GUI
-Buzzer Ready (Solder pin)
-LED_STRIP Ready (Solder pin)
Setting Notice:
- SBUS/IBUS/DSMX receiver please configure RX1 (UART1) as input, and enable Serial_RX
- PPM receiver don’t need to enable Serial_RX
- DSM/DSM2/DSMX receiver power from 3.3V
- SBUS and PPM receiver power from 5V
Package Included:
1x TeenyF4 Pro flight controller board
4x M2*5+5 Nylon column
4x M2 Nuts
4x M2
Sản Phẩm Liên Quan
HOT
Bikini hàng Âu
₫ 400.000
HOT
Bikini Thái quả ngang chấm bi
₫ 350.000
HOT
Bikini made in Thailand
₫ 350.000
HOT
Bikini Thái
₫ 300.000
HOT
Bikini OKISS- QCXK
₫ 400.000
HOT
Bikini xuất Âu
₫ 300.000