Bảng Mạch Điều Chỉnh Điện Áp Mini Usb Nano V3.0 Atmega328 5v Cho Arduino
69.300
₫ 65.900
Sản phẩm Bảng Mạch Điều Chỉnh Điện Áp Mini Usb Nano V3.0 Atmega328 5v Cho Arduino đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 69.300 xuống còn ₫ 65.900, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
pinklans Mini USB Nano V3.0 ATmega328 5V Micro-controller Board Voltage Regulator For Arduino
Features:
The duino Nano is a small, complete, and breadboard-friendly board based on the ATmega328 (duino Nano 3.0) . It lacks only a DC power jack, and works with a Mini-B USB cable instead of a standard one.
The duino Nano can be powered via the Mini-B USB connection, 6-20V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source.
The CH340G chip on the Nano is only powered if the board is being powered over USB. As a result, when running on external (non-USB) power, the 3.3V output (which is supplied by the FTDI chip) is not available and the RX and TX LEDs will flicker if digital pins 0 or 1 are high.
Descriptions:
Type: with needle, without needle
Condition: New
Microcontroller:Atmel ATmega328
Operating Voltage (logic level):5 V
Input Voltage (recommended):7-12 V
Input Voltage (limits):6-20 V
Digital I/O Pins:14 (of which 6 provide PWM output)
Analog Input Pins:8
DC Current per I/O Pin:40 mA
Flash Memory:32 KB (ATmega328) of which 2 KB used by bootloader
SRAM:2 KB (ATmega328)
EEPROM:1 KB (ATmega328)
Clock Speed:16 MHz
Specifications:
Dimensions: 42*17*8 mm
Cable Length:about 235mm
Color: blue
Packing Content:
1 x Nano V3.0 ATmega328P
Notes:
Accessories resistance has mixed color phenomenon. Please know it. Thank
Features:
The duino Nano is a small, complete, and breadboard-friendly board based on the ATmega328 (duino Nano 3.0) . It lacks only a DC power jack, and works with a Mini-B USB cable instead of a standard one.
The duino Nano can be powered via the Mini-B USB connection, 6-20V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source.
The CH340G chip on the Nano is only powered if the board is being powered over USB. As a result, when running on external (non-USB) power, the 3.3V output (which is supplied by the FTDI chip) is not available and the RX and TX LEDs will flicker if digital pins 0 or 1 are high.
Descriptions:
Type: with needle, without needle
Condition: New
Microcontroller:Atmel ATmega328
Operating Voltage (logic level):5 V
Input Voltage (recommended):7-12 V
Input Voltage (limits):6-20 V
Digital I/O Pins:14 (of which 6 provide PWM output)
Analog Input Pins:8
DC Current per I/O Pin:40 mA
Flash Memory:32 KB (ATmega328) of which 2 KB used by bootloader
SRAM:2 KB (ATmega328)
EEPROM:1 KB (ATmega328)
Clock Speed:16 MHz
Specifications:
Dimensions: 42*17*8 mm
Cable Length:about 235mm
Color: blue
Packing Content:
1 x Nano V3.0 ATmega328P
Notes:
Accessories resistance has mixed color phenomenon. Please know it. Thank
Sản Phẩm Liên Quan
HOT
Bikini hàng Âu
₫ 400.000
HOT
Bikini Thái quả ngang chấm bi
₫ 350.000
HOT
Bikini made in Thailand
₫ 350.000
HOT
Bikini Thái
₫ 300.000
HOT
Bikini OKISS- QCXK
₫ 400.000
HOT
Bikini xuất Âu
₫ 300.000