Bảng Mạch Điện Tăng Áp 250w Cho Notebook

The power supply adopts imported power management chip design, with high reliability, small inrush current, small volume (length 70MM* width 36MM* height 13MM) efficiency up to 96%, maximum power 250W. At the same time, the aluminum substrate design and easy to install, the back of the plate can be directly flat on the metal housing heat. Reduce equipment space.


(Voltage regulation resistance is 10K, current regulation 4.7K)

[Module name] 250W booster constant-current module

Module nature: Non-isolated BOOST module

[Input voltage] : DC8.5V-48V

[Input current] : 10A (MAX) more than 8A, please strengthen the heat dissipation

[Static working current] : 10mA(when 12V litre 20V, the higher the output voltage, the higher the static current will be)



[Output voltage] : 10-50V continuously adjustable

12-80V fixed output (for batch customers)

[Output current] : 10A MAX more than 6A, please strengthen the heat dissipation (related to the input and output pressure difference, the greater the pressure difference, the smaller the output current)



[Constant current range] : 0.2-8A

[Output power] : = Input voltage *10A, for example: input 12V*5A=60W, input 24V*5A=120W,

Enter 36V*5A=180W, enter 48V*5A=240W,

If more power is needed, two modules can be used in parallel. For example, if the output is 10A, two modules can be used in parallel.

Just set the current of each module to 5A.

[Operating temperature] : -40~+85 degrees (when the ambient temperature is too high, please strengthen the heat dissipation)

[working frequency] : 150KHz

[Conversion efficiency] : up to 96% (efficiency is related to input, output voltage, current and differential pressure)

[Overcurrent protection] : yes (input more than 13A, automatically reduce the output voltage, there is a certain range of error.

[Input backconnect protection] : Yes, (less than 5A, if you need more backconnect current, please put the diode in the input string)

[Installation method] : 4 3mm screw holes

[Connection mode] : Connection output

[Module size] : length 70mm wide 36mm high 13mm

[Module single weight] : 50g

Note:
Due to manual measurement, please allow 1-3mm different.
Due to different displays and different lighting, the image may not reflect the actual colors of the project.
Thank you for your understanding.

When purchasing electronic components, please have certain electronic basic knowledge of the module. Most modules only provide descriptions or send materials. There is no technical consulting support. Please be careful to shoot for begin