Bảng mạch chuyển đổi XL4015 5A 75W 4.0-38V to 1.25V-36V DC-DC có thể điều chỉnh

"100% brand new and high quality
Module Highlights: 1 5A power high-efficiency buck low ripple! 2 with power indicator light! 3 onboard voltage meter, voltmeter can be self-calibration, it will never exist voltmeter problem of inaccurate! ! 4 with heat sink! 5 Get pillars free!
Module performance and features: With power indicator light With voltmeter shows and voltmeter can be self-calibration. It uses a more advanced microprocessor voltage voltmeter error ± 0.05V, Range 0 ~ 40V. (Note: To ensure the accuracy of voltmeter, please ensure that the input voltage is above 4.5V) touch of a button to switch measuring input or output voltage, and has a light show which is being measured voltages, and save the settings, even if powered off and then on. voltmeter can be closed when not needed touch of the button on the left side can be easily achieved. With terminals, no iron can also be easy to use, and retention wire connection points. Input voltage 4.0 ~ 38V. (Input voltage must be higher than the output voltage 1.5v more) adjustable output voltage range of 1.25V ~ 35V continuously adjustable. (Input voltage must be higher than the output voltage of 1.5V) output current up to 5A, is recommended in 4.5A. output power up to 75W. high conversion efficiency, up to 96% (efficiency and input and output voltage, current, pressure related) Load Regulation S (I) ≤0.8%, voltage regulation S (u) ≤0.8% with thermal protection and short circuit protection Size :6*3.70*1.30cm/2.36""*1.46""*0.51""
Onboard voltage meter self-calibration method: 1. On-board voltage table shows the output voltage, long press on the right button for two seconds after the release, voltmeter and output voltage indicator ""OUT"" synchronous flashing, this time into the output voltage
Applications: This module can be used down the field in input voltage is above the output voltage, such as batteries, power transformers, DIY adjustable power supply, 24V car T of the power equipment industry down, 12V turn 3.3V, 12V turn 5V, 24V turn 5V, 24V switch 12V, 36V switch 24V like.
Please note that buyers: A customer can not be adjusted to reflect the module output voltage is always equal to the input voltage. When you encounter this problem, please counterclockwise rotary potentiometer 10 laps, then use the module can adjust the voltage of the normal. Because the step-down module factory, the default output voltage of about 20V.
Please note that buyers:
Quantity:1P