Bảng Mạch Biến Áp 500w Dc 12v / 24v Sang Ac 220v 380v 8x7.5cm Cho Xe Hơi
727.300
₫ 391.700
Sản phẩm Bảng Mạch Biến Áp 500w Dc 12v / 24v Sang Ac 220v 380v 8x7.5cm Cho Xe Hơi đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 727.300 xuống còn ₫ 391.700, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Description:
Item type: tool
Power: 500W
Input: DC12V (requires 24V to take a message)
Output: AC220V 380V and AC18V
Quiescent current: 0.35A
Output waveform: high frequency square wave
Protection: no protection
Pcb board with military grade board, size 8 cm * 7.5 cm
Package includes:
1 * Car Converter
Notes:
-This board is a high-frequency square wave AC output, so the general inductive appliances can not bring! ! "such as: motor, electric fan, coil transformer, etc."
Another: simple resistance and resistance step-down small appliances, cheap resistance to resist buck LED lamps, etc. may not be used
-When connecting to a small load (LED lights, mobile phone charger, DVD set-top box, etc.), it is recommended to connect the output voltage to a low point such as: 160V
-It is recommended to increase the heat sink when working for a long time.
-The power supply cannot be reversed. The power supply and power line should be large enough.
-Because there is no protection output, do not overload or short circuit.
-Output high-frequency square wave AC voltage Many general multimeters can not measure or show low and high (is not correct, not actual voltage)
Special reminder: The electronic product is recommended to be rectified into a DC output in our board output string high-frequency diodes. Because many rectifier power supplies are used in the rectification part of the electrician to save cost, they are connected to the "high-frequency AC output." "The rectifier diode of the conductor will be rapidly heated and damaged, and the diode will break down. Eventually the board burned out.
The colors deviation might differ due to different monitor settings, please kindly unders
Item type: tool
Power: 500W
Input: DC12V (requires 24V to take a message)
Output: AC220V 380V and AC18V
Quiescent current: 0.35A
Output waveform: high frequency square wave
Protection: no protection
Pcb board with military grade board, size 8 cm * 7.5 cm
Package includes:
1 * Car Converter
Notes:
-This board is a high-frequency square wave AC output, so the general inductive appliances can not bring! ! "such as: motor, electric fan, coil transformer, etc."
Another: simple resistance and resistance step-down small appliances, cheap resistance to resist buck LED lamps, etc. may not be used
-When connecting to a small load (LED lights, mobile phone charger, DVD set-top box, etc.), it is recommended to connect the output voltage to a low point such as: 160V
-It is recommended to increase the heat sink when working for a long time.
-The power supply cannot be reversed. The power supply and power line should be large enough.
-Because there is no protection output, do not overload or short circuit.
-Output high-frequency square wave AC voltage Many general multimeters can not measure or show low and high (is not correct, not actual voltage)
Special reminder: The electronic product is recommended to be rectified into a DC output in our board output string high-frequency diodes. Because many rectifier power supplies are used in the rectification part of the electrician to save cost, they are connected to the "high-frequency AC output." "The rectifier diode of the conductor will be rapidly heated and damaged, and the diode will break down. Eventually the board burned out.
The colors deviation might differ due to different monitor settings, please kindly unders