Bảng Định Tuyến 1-3 / 8 "1 / 2" Inch (12.7Mm) 45 Độ Cho Chế Tác Gỗ Và Phụ Kiện
212.000
₫ 115.000
Sản phẩm Bảng Định Tuyến 1-3 / 8 "1 / 2" Inch (12.7Mm) 45 Độ Cho Chế Tác Gỗ Và Phụ Kiện đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 212.000 xuống còn ₫ 115.000, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Features:
*100% Brand New and High Quality
*Applicable scope: for the woodworking tenon, woodworking plywood
*Using for the manual drawer making or other woodworking
*The joint bit suitable for woods, MDF, particle board, plywood compact panel, avoid cutting metal, o therwise it will break
Specifications:
Material: cemented carbide
Dimensions: (approx.)
1/4*1-3/8:
Shank diameter: 1/4"inch(6.35mm)
Width:1-3/8"
Length:2"
1/2*1-3/8:
Shank diameter: 1/2"inch(12.7mm)
Width:1-3/8"
Length:56mm
How to Use:
1 .Put the Lock Miter into the carbon steel shank router table or desktop woodworking engraving machine, please make sure that the chuck is tight and avoid loosening and causing it to throw out !!!
-The wood is at 90°and this router bit cuts the shape out of the wood, needn't pre-cut;
-Just one router bit, cut one edge and one face to get a 90 degree corner, it works great for frames or connecting joints.
Package Contents:
1*Miter Router Bit Woodwork Cutter1/2inch
2*Miter Router Bit Woodwork Cutter(1/2inch+1/4
*100% Brand New and High Quality
*Applicable scope: for the woodworking tenon, woodworking plywood
*Using for the manual drawer making or other woodworking
*The joint bit suitable for woods, MDF, particle board, plywood compact panel, avoid cutting metal, o therwise it will break
Specifications:
Material: cemented carbide
Dimensions: (approx.)
1/4*1-3/8:
Shank diameter: 1/4"inch(6.35mm)
Width:1-3/8"
Length:2"
1/2*1-3/8:
Shank diameter: 1/2"inch(12.7mm)
Width:1-3/8"
Length:56mm
How to Use:
1 .Put the Lock Miter into the carbon steel shank router table or desktop woodworking engraving machine, please make sure that the chuck is tight and avoid loosening and causing it to throw out !!!
-The wood is at 90°and this router bit cuts the shape out of the wood, needn't pre-cut;
-Just one router bit, cut one edge and one face to get a 90 degree corner, it works great for frames or connecting joints.
Package Contents:
1*Miter Router Bit Woodwork Cutter1/2inch
2*Miter Router Bit Woodwork Cutter(1/2inch+1/4