Bản lề cửa thủy lực cỡ lớn cho tủ quần áo
94.000
₫ 62.000
Sản phẩm Bản lề cửa thủy lực cỡ lớn cho tủ quần áo đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 94.000 xuống còn ₫ 62.000, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Features:
Special Hinges with Large Angle Hydraulic Damping from 165 to 180 Degrees.
Easy to use, safe and reliable.
Copper core hydraulic pressure, arbitrary.
Silent rust-proof, damp buffer, suitable for all kinds of drawer wardrobes.
Cold-rolled steel with thick material, corrosion resistance, acid and alkali resistance, good toughness and high hardness.
Damping hydraulic forging rod, fully sealed hydraulic transmission, precise density oil body, more smooth cushioning.
Adjust the screw and reinforce the rivet to make the force more uniform.
Specifications:
Size: 151*64*30mm/5.94*2.52*1.18"
Material: cold rolled steel
Surface treatment: nickel plating
Type: Bending hinge
Installation mode:
Full cover (straight body): The door panels cover the side panels of the cabinet. There is a gap between the two so that the door can be opened smoothly.
Half cover (middle bend): In this case, two doors share a side plate. There is a required small gap between them. The covering distance of each door decreases correspondingly, and the flexure hinge of the hinged arm is needed.
Inside (big bend): In this case, the door is located in the cabinet, beside the side panel of the cabinet. It also needs a gap so that the door can open smoothly. Hinges with very curved hinges are required.
Notes:
1. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
2. Please allow 1-3cm measuring deviation due to manual measurement.
Included:
1 X Hinge
6 X Scre
Special Hinges with Large Angle Hydraulic Damping from 165 to 180 Degrees.
Easy to use, safe and reliable.
Copper core hydraulic pressure, arbitrary.
Silent rust-proof, damp buffer, suitable for all kinds of drawer wardrobes.
Cold-rolled steel with thick material, corrosion resistance, acid and alkali resistance, good toughness and high hardness.
Damping hydraulic forging rod, fully sealed hydraulic transmission, precise density oil body, more smooth cushioning.
Adjust the screw and reinforce the rivet to make the force more uniform.
Specifications:
Size: 151*64*30mm/5.94*2.52*1.18"
Material: cold rolled steel
Surface treatment: nickel plating
Type: Bending hinge
Installation mode:
Full cover (straight body): The door panels cover the side panels of the cabinet. There is a gap between the two so that the door can be opened smoothly.
Half cover (middle bend): In this case, two doors share a side plate. There is a required small gap between them. The covering distance of each door decreases correspondingly, and the flexure hinge of the hinged arm is needed.
Inside (big bend): In this case, the door is located in the cabinet, beside the side panel of the cabinet. It also needs a gap so that the door can open smoothly. Hinges with very curved hinges are required.
Notes:
1. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
2. Please allow 1-3cm measuring deviation due to manual measurement.
Included:
1 X Hinge
6 X Scre
Sản Phẩm Liên Quan
HOT
Kệ duy tân mini 5 tầng
₫ 75.000
HOT
Set 4 quần lót Nhật
₫ 1.049.000
HOT
Kem tẩy đa năng Tracatu
₫ 32.000