Arduino Pro Micro Leonardo Atmega32u4 5v 16mhz
₫ 211.300
Sản phẩm Arduino Pro Micro Leonardo Atmega32u4 5v 16mhz đang được mở bán với mức giá siêu tốt khi mua online, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Want to make a super small project?
One more arduino product, arduino pro micro is present to meet your needs.
Pro micro is similar to pro mini except pro micro using atmega32u4.
The usb transceiver in 32u4 allows for additional on-board usb connections without the need for external usb interface.
This cute little board can do all the arduino tricks you 've always done with 4 channel 10 bit adc, 5 pin pwm, 12 digital i / o and also the rx and tx serial connections. Working on 16mhz and 5 v, it reminds us of other arduino boards in general, only that these little things can fit anywhere. There is a voltage regulator on board so that the board can receive voltage up to 12 v. If you use unregulated power, make sure you use raw pins instead of vcc.
Dimensions: 33x17.8mm
Feature:
- atmega 32u4 works on 5v / 16mhz
- support under arduino ide v1.0.1
- micro usb onboard connector for programmable
- 4x 10-bit adc pins
- 12x digital i / o (5 for pwm)
- rx and tx serial connections.
- arduino 's smallest compatible board at the moment.
#Arduino #Arduinopro
One more arduino product, arduino pro micro is present to meet your needs.
Pro micro is similar to pro mini except pro micro using atmega32u4.
The usb transceiver in 32u4 allows for additional on-board usb connections without the need for external usb interface.
This cute little board can do all the arduino tricks you 've always done with 4 channel 10 bit adc, 5 pin pwm, 12 digital i / o and also the rx and tx serial connections. Working on 16mhz and 5 v, it reminds us of other arduino boards in general, only that these little things can fit anywhere. There is a voltage regulator on board so that the board can receive voltage up to 12 v. If you use unregulated power, make sure you use raw pins instead of vcc.
Dimensions: 33x17.8mm
Feature:
- atmega 32u4 works on 5v / 16mhz
- support under arduino ide v1.0.1
- micro usb onboard connector for programmable
- 4x 10-bit adc pins
- 12x digital i / o (5 for pwm)
- rx and tx serial connections.
- arduino 's smallest compatible board at the moment.
#Arduino #Arduinopro