Arduino Cnc Shield V4 + Arduino Nano Ch340 + A4988 Stepper Driver
₫ 306.000
Sản phẩm Arduino Cnc Shield V4 + Arduino Nano Ch340 + A4988 Stepper Driver đang được mở bán với mức giá siêu tốt khi mua online, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Product description
The arduino cnc shield makes it easy to get your cnc projects up and running in a few hours. It uses opensource firmware on Arduino to control 4 stepper motors using 4 A4988 Stepper drivers,, with this shield and the Arduino you can build all kinds of robotics or CNC projects including CNC routers,laser cutters and even pick&place machines.
Features
Grbl 0.8c compatible. (Open source firmware that runs on an arduino uno that turns g-code commands into stepper signals)https://github*com/grbl/grbl)
4-axis support (x, y, z, a-can duplicate x,y,z or do a full 4th axis with custom firmware using pins d12 and d13)
2 x end stops for each axis (6 in total)
# spindle, coolant enable and direction #
Uses removable pololu a4988 compatible stepper drivers. (A4988, drv8825 and others)
Jumpers to set the micro-stepping for the stepper drivers. Some drivers like the drv8825 can do up to 1 / 32 micro-stepping
Compact design.
Stepper motors can be connected with 4 pin molex connectors.
Runs on 12-36v dc. At the moment only the pololu drv8825 drivers can handle up to 36v so please consider the operation voltage when powering the board.
Pack a list,
1 x cnc shield v4 1 x nano ch340 3 x a4988 stepper motor driver
1 x usb
The arduino cnc shield makes it easy to get your cnc projects up and running in a few hours. It uses opensource firmware on Arduino to control 4 stepper motors using 4 A4988 Stepper drivers,, with this shield and the Arduino you can build all kinds of robotics or CNC projects including CNC routers,laser cutters and even pick&place machines.
Features
Grbl 0.8c compatible. (Open source firmware that runs on an arduino uno that turns g-code commands into stepper signals)https://github*com/grbl/grbl)
4-axis support (x, y, z, a-can duplicate x,y,z or do a full 4th axis with custom firmware using pins d12 and d13)
2 x end stops for each axis (6 in total)
# spindle, coolant enable and direction #
Uses removable pololu a4988 compatible stepper drivers. (A4988, drv8825 and others)
Jumpers to set the micro-stepping for the stepper drivers. Some drivers like the drv8825 can do up to 1 / 32 micro-stepping
Compact design.
Stepper motors can be connected with 4 pin molex connectors.
Runs on 12-36v dc. At the moment only the pololu drv8825 drivers can handle up to 36v so please consider the operation voltage when powering the board.
Pack a list,
1 x cnc shield v4 1 x nano ch340 3 x a4988 stepper motor driver
1 x usb
Sản Phẩm Liên Quan
HOT
Bikini hàng Âu
₫ 400.000
HOT
Bikini Thái quả ngang chấm bi
₫ 350.000
HOT
Bikini made in Thailand
₫ 350.000
HOT
Bikini Thái
₫ 300.000
HOT
Bikini OKISS- QCXK
₫ 400.000
HOT
Bikini xuất Âu
₫ 300.000