AQARA Thiết Bị Cảm Biến Nhiệt Độ Độ Ẩm Không Dây

Note:
This product is ecological chain brand product, there is no any marks on the products, please note it.
This item must match for Xiaomi multifunctional gateway to use.
APP: Home APP/ Aqara APP
Description:
The Aqara Temperature Humidity Sensor smartly monitors and records indoor temperature and humidity in real time, matching with Aqara Multifunctional Gateway Hub(not included) to link with more smart devices via APP, making your home smater.   

Features:
* Monitoring home temperature and humidity changes and atmospheric pressure in real time.
* Support APP and Aqara APP to check the current temperature, humidity and pressure data and historical change.
* Smart linkage with much more devices
* Must match for Multifunctional Aqara Gateway Hub to use.
* Temperature measuring accuracy is -0.3 - 0.3 degree.
* Humidity measuring accuracy is -3 - 3 percent.

Specifications:
Item type: Aqara Temperature Humidity Sensor
Model: WSDCGQ11LM
Color: White
Wire-less type: Zigbee
Power: 1 * CR2032 button battery
Temperature detection range and accuracy: -20℃~+60℃,±0.3℃
Air pressure detection range and accuracy: 30HPa~110KPa,±120Pa
Item size: 9*36*36mm
Package weight: 60g/2.11ounces
Package size: 160*100*66mm/6.29*3.93*2.59inches

Package List:
1 * Temperature Humidity Sensor （Other smart devices on the picture are not included）
1 * Button Battery
1 * User manual
FAQ:
1. How to add the Aqara Temperature and Humidity Sensor to the Control hub?
Move the Temperature and Humidity Sensor close to the hub, open app, go to the Device page of the hub, tap "Add child device", select "Temperature and Humidity Sensor" and add according to instructions. When the hub makes voice prompts, it indicates that it is added successfully.
2. Why does the Aqara Temperature and Humidity Sensor fail to connect? How to reconnect?
Possible reason:
* Operation error. Please add the device according to the adding method again.
* The device is too far apart from the Hub. Please move the device closer to the Hub.
* There are too many devices under the Hub.
3. Why is the Aqara Temperature and Humidity Sensor offline often?
Possible reason:
* If the device is too far apart from the Hub, please test the distance between the sensor device and the Hub and install the device closer to the Hub.
* Low battery or no battery. Please replace the battery.
* The device is installed on the surface and the signal strength is interfered . Please avoid metal surface.
4. How to verify that the current installation location is proper?
After the Temperature and Humidity Sensor is connected successfully and before it is installed, press the button of the Temperature and Humidity Sensor, if the Hub gives a voice prompt "Connected Successfully", current location is proper; if the Hub does not give a voice prompt, move the Temperature and Humidity Sensor closer and try again.
5. Attentions need to be paid while installing Temperature and Humidity Sensor: