Ăng Ten Khuếch Đại Tín Hiệu Tần Số 5.8ghz Yagi Cho Điều Khiển Từ Xa Dji Mavic Air 2
170.000
₫ 129.000
Sản phẩm Ăng Ten Khuếch Đại Tín Hiệu Tần Số 5.8ghz Yagi Cho Điều Khiển Từ Xa Dji Mavic Air 2 đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 170.000 xuống còn ₫ 129.000, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Features:
Suitable Model: Suitable for Dji Mavic Air 2 drone.
5.8GHz YAGI Antenna Amplifier Signal Booster Range Extender For DJI Mavic Air 2 Remote Controller.
Yagi antenna: Use the principle of Yagi antenna to make a general booster for Mavic Air 2 to enhance the antenna signal.
Under the same signal interference strength of the flight environment, the distance of the aircraft can be increased by 50-500 meters.
Material: Made of ABS, and aluminum, anodized treatment, enhanced texture, wear resistance, corrosion resistance.
Plug and Play: Installation and disassembly are simple and quick, no need to change control, plug and play, non-destructive installation design.
Portable: The weight is about 12g, and the lightweight design makes it easy to carry and store.
Features: The antenna signal is stronger and more stable, reducing accidents and making flying safer. Real-time transmission images are clearer.
Principle of Yagi antenna: The gain effect is obvious, it has good directivity, and has certain anti-interference ability.
By concentrating the RF signals together, it is like adding a reflector to the bulb, which can illuminate further.
The external Yagi antenna can make the signal more concentrated, and naturally it can fly farther!
Specifications:
Material: ABS, Aluminum
Color: black
Suitable Model: for Dji Mavic Air 2
Size: (Approx) 72x65mm/2.83x2.56inch(LxW)
Package Included:
1 PC x Yagi antenna signal booster
Install:
1. Take out the remote control and unfold it.
2. Align the Yagi antenna with the lower end of the remote control antenna assembly, and buckle up with a little force.
The dots inside the Yagi antenna are aligned with the slot of the remote control antenna assembly.
3. Then connect the phone to complete the installation.
4. Disassembly method: Push the Yagi antenna out of the slot, and then gently pull it out.
Note:
1. Due to the light and screen difference, the item's color may be slightly different from the pictures.
2. Please allow 0.5-2 cm differences due to manual measurement.
#YAGI #Antenna #Amplifier #5.8GHz #Outdoor #ABS #Toy #Accessories #Durable #Portable #Stable #Signal #Bo
Suitable Model: Suitable for Dji Mavic Air 2 drone.
5.8GHz YAGI Antenna Amplifier Signal Booster Range Extender For DJI Mavic Air 2 Remote Controller.
Yagi antenna: Use the principle of Yagi antenna to make a general booster for Mavic Air 2 to enhance the antenna signal.
Under the same signal interference strength of the flight environment, the distance of the aircraft can be increased by 50-500 meters.
Material: Made of ABS, and aluminum, anodized treatment, enhanced texture, wear resistance, corrosion resistance.
Plug and Play: Installation and disassembly are simple and quick, no need to change control, plug and play, non-destructive installation design.
Portable: The weight is about 12g, and the lightweight design makes it easy to carry and store.
Features: The antenna signal is stronger and more stable, reducing accidents and making flying safer. Real-time transmission images are clearer.
Principle of Yagi antenna: The gain effect is obvious, it has good directivity, and has certain anti-interference ability.
By concentrating the RF signals together, it is like adding a reflector to the bulb, which can illuminate further.
The external Yagi antenna can make the signal more concentrated, and naturally it can fly farther!
Specifications:
Material: ABS, Aluminum
Color: black
Suitable Model: for Dji Mavic Air 2
Size: (Approx) 72x65mm/2.83x2.56inch(LxW)
Package Included:
1 PC x Yagi antenna signal booster
Install:
1. Take out the remote control and unfold it.
2. Align the Yagi antenna with the lower end of the remote control antenna assembly, and buckle up with a little force.
The dots inside the Yagi antenna are aligned with the slot of the remote control antenna assembly.
3. Then connect the phone to complete the installation.
4. Disassembly method: Push the Yagi antenna out of the slot, and then gently pull it out.
Note:
1. Due to the light and screen difference, the item's color may be slightly different from the pictures.
2. Please allow 0.5-2 cm differences due to manual measurement.
#YAGI #Antenna #Amplifier #5.8GHz #Outdoor #ABS #Toy #Accessories #Durable #Portable #Stable #Signal #Bo