Alwaysonline 3D Printer Parts Kit CNC Shield V3 Expansion Board + A4988 Stepper Motor Driver UNO R3
325.000
₫ 199.000
Sản phẩm Alwaysonline 3D Printer Parts Kit CNC Shield V3 Expansion Board + A4988 Stepper Motor Driver UNO R3 đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 325.000 xuống còn ₫ 199.000, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
___________________❀Alwaysonline❀___________________
Welcome to our store, we insist on the lowest price to sell the best quality items.
✔Ready Stock ✔Wholesale Price ✔Quality Checked
★Surprises for you★
☞Shop Voucher: Get More Discount
☞Follow Shop: Free Gifts
☞“Like” Items: Priority Shipping
( Sent us follow shop screenshot and remark on your order "Free Gift", if not will miss)
★★Attention Please★★
✌We will be based on your guests in your country to send the corresponding adapter plug.
_______________❀Product Information❀______________
Features:
CNC V3 Board:
Detachable A4988 compatible stepper drive.
The expansion board can be used for the engraving machine and the 3 d printer driver expansion board.
GRBL 0.8 compatible. Open source firmware running for Arduino UNO, converting G code commands to step signals.
PWM spindle and direction pins, 4-axis support (X, Y, Z, A- can copy X, Y, Z or make a complete 4th axis, using custom firmware, using pins D12 and D13).
Compact design. The stepper motor can be connected or soldered into place with a 4-pin molex connector.
Please note that this is an unassembled kit that requires basic welding skills.
A4988 Stepper Motor Driver:
A mixer with a slow current decay mode.
Internal UVLO and low RDS (on) output.
Automatic current decay mode detection/selection.
Synchronous rectification, low power consumption.
Warning: Connecting or disconnecting the stepper motor while the drive is powered may damage the drive.
Specifications:
CNC V3 Board:
Color: Red
Voltage: DC 12~36 V (At this time, only the DRV8825 driver can handle voltages up to 36V, so please consider the operating voltage when powering the board.)
A4988 Stepper Motor Driver:
Color: Red
Thermal shutdown circuit: yes
Cross current protection: yes
Ground fault protection: yes
Load short circuit protection: yes
Compatible logic supplies: 3.3V and 5 V
UNO R3 Board:
Single chip microcomputer: ATmega328
Clock speed: 16 MHz
USB interface: ATmega16U2
Operating voltage: 5 V
I-I / O pin output current: up to 40 mA
3.3 V output current: up to 150 mA
Digital I/O pins: 14 (including 6 PWM-capable pins)
Analog input pin: 6
EEPROM: 1 kB
Static RAM (SRAM): 2 kB
Flash: 32 kB
Package List:
1 * UNO R3 Board
1 * CNC Shield V3 Expansion Board
4 * A4988 Stepper Motor Driver
1 * 40-way Pin
1 * USB Ca
Welcome to our store, we insist on the lowest price to sell the best quality items.
✔Ready Stock ✔Wholesale Price ✔Quality Checked
★Surprises for you★
☞Shop Voucher: Get More Discount
☞Follow Shop: Free Gifts
☞“Like” Items: Priority Shipping
( Sent us follow shop screenshot and remark on your order "Free Gift", if not will miss)
★★Attention Please★★
✌We will be based on your guests in your country to send the corresponding adapter plug.
_______________❀Product Information❀______________
Features:
CNC V3 Board:
Detachable A4988 compatible stepper drive.
The expansion board can be used for the engraving machine and the 3 d printer driver expansion board.
GRBL 0.8 compatible. Open source firmware running for Arduino UNO, converting G code commands to step signals.
PWM spindle and direction pins, 4-axis support (X, Y, Z, A- can copy X, Y, Z or make a complete 4th axis, using custom firmware, using pins D12 and D13).
Compact design. The stepper motor can be connected or soldered into place with a 4-pin molex connector.
Please note that this is an unassembled kit that requires basic welding skills.
A4988 Stepper Motor Driver:
A mixer with a slow current decay mode.
Internal UVLO and low RDS (on) output.
Automatic current decay mode detection/selection.
Synchronous rectification, low power consumption.
Warning: Connecting or disconnecting the stepper motor while the drive is powered may damage the drive.
Specifications:
CNC V3 Board:
Color: Red
Voltage: DC 12~36 V (At this time, only the DRV8825 driver can handle voltages up to 36V, so please consider the operating voltage when powering the board.)
A4988 Stepper Motor Driver:
Color: Red
Thermal shutdown circuit: yes
Cross current protection: yes
Ground fault protection: yes
Load short circuit protection: yes
Compatible logic supplies: 3.3V and 5 V
UNO R3 Board:
Single chip microcomputer: ATmega328
Clock speed: 16 MHz
USB interface: ATmega16U2
Operating voltage: 5 V
I-I / O pin output current: up to 40 mA
3.3 V output current: up to 150 mA
Digital I/O pins: 14 (including 6 PWM-capable pins)
Analog input pin: 6
EEPROM: 1 kB
Static RAM (SRAM): 2 kB
Flash: 32 kB
Package List:
1 * UNO R3 Board
1 * CNC Shield V3 Expansion Board
4 * A4988 Stepper Motor Driver
1 * 40-way Pin
1 * USB Ca