AIRCRAFT MODEL Mô Đun Sg90 Sg90S 9g Mg996R Cho Máy Bay Điều Khiển Từ Xa

Brand: TELESKY
Model: Servo SG90
Color classification: SG90 9G 90 degree-180 degree general purpose SG90 9G 360 degree analog MG90S 90-180 degree analog MG90S 360 degree digital MG90S 90-180 degree MG90 with bearing MG995 180 degree MG996 180 degree MG945 180 degree MG946 180 degree MG995 360 degree MG996 360 degrees MG945 360 degrees MG946 360 degrees

SG90 SG90s 9g steering gear MG996R helicopter QC module remote control aircraft motor aircraft model copper tooth tilt
Reminder: Recently, some customers reported that the 180 degree and 360 degree steering gear is not clear. It is recommended to click here to purchase the steering gear tester.
Information link: https://pan.baidu.com/s/1_SBCgwMdxC7OPdpQrpirVg Extraction code: 1234
What is the difference between a 360-degree steering gear and an ordinary steering gear?
Answer: All steering gears (except for special customized steering gears) are controlled by PWM.
The output of the steering gear control board is a PWM signal, so the steering gear control board can control both 180 degree and 360 degree steering gears.
360 degree servo is PWM to control its rotation speed and direction, 500-1500us PWM is to control its forward rotation, the smaller the value, the greater the rotation speed; 1500-2500us PWM is its reverse, the larger the value, the rotation The greater the speed. 1500us PWM is to control it to stop. (Because the mid position of each servo may be different, some servos may be 1520us PWM, and the servo will stop. So you need to actually test the mid position of the servo yourself.)
A 360-degree steering gear is a combination of an ordinary DC motor + a motor drive board, so it can only rotate continuously, cannot be positioned, and cannot know its angle and number of turns (unless you install other sensors outside the steering gear) .
The 180-degree steering gear is PWM controlled by its rotation angle. The 500-2500us PWM corresponds to the 0-180 degree that controls the 180-degree steering gear. There is a one-to-one correspondence. A PWM value corresponds to an angle of the steering