Set 5 Động Cơ Bước A4988 Kèm Quạt Tản Nhiệt Dc12V Cho Máy In 3d
₫ 243.000
Sản phẩm Set 5 Động Cơ Bước A4988 Kèm Quạt Tản Nhiệt Dc12V Cho Máy In 3d đang được mở bán với mức giá siêu tốt khi mua online, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
2 Set 3D printer accessories: 1 set x PTFE Tube & 1 set x Stepper Motor Diver ule
1.Cooling fan for enhancing 3D printer heat dissipation
2. PTFE tube has excellent chemical stability, strong acid and alkali resistance, wide temperature range, can be used under normal pressure from -60Celsius to 260Celsius
3. PTFE tube has a very low coefficient of friction, is an excellent anti-friction, self-lubricating material, it also has aging non-stick non-combustible
4. Equipped with a strong yellow spring, making the pressure cutting easier
colour:red
Material:PCB+rubber + ABS + metal
A type:
A4988 driver board widely used in 3D printers and small CNC machines
Simple step and direction control interface
Thermal protection, over-current protection, ground fault protection
Five different step resolutions: full-step, half-step, quarter-step, eighth-step, and sixteenth-step
Adjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor's rated voltage toachieve higher step rates
Intelligent chopping control that automatically selects the correct current decay e (fast decay or slow decay)
Over-temperature thermal shutdown, under-voltage lockout, and crossover-current protection
Automatic current decay e detection / selection
Size:
A4988:20 x 15 x 11mm(LWH)
Heat Sink: 9 x 9 x 5mm(LWH)
B type:
Wiring method, red wire positive electrode, black wire negative electrode
Product name: 3D printer accessories
Voltage: DC12V
Speed: 5612±5%RPM
Rated current: 0.1A
Power consumption: 1.2W
Noise: 23DBA
Lifespan: 50000 hours 40Celsius
Temperature range: -10 +80Celsius
Fan size: 40x40x10mm
Spring size: 8x25mm
PTFE tube size: 2x4x1000mm
Package Contents:
1 x PTFE Tube
1 x Cooling Fan
4 x Spring
5 x Stepper Motor Diver ule
5 x Heat Sink
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1
1.Cooling fan for enhancing 3D printer heat dissipation
2. PTFE tube has excellent chemical stability, strong acid and alkali resistance, wide temperature range, can be used under normal pressure from -60Celsius to 260Celsius
3. PTFE tube has a very low coefficient of friction, is an excellent anti-friction, self-lubricating material, it also has aging non-stick non-combustible
4. Equipped with a strong yellow spring, making the pressure cutting easier
colour:red
Material:PCB+rubber + ABS + metal
A type:
A4988 driver board widely used in 3D printers and small CNC machines
Simple step and direction control interface
Thermal protection, over-current protection, ground fault protection
Five different step resolutions: full-step, half-step, quarter-step, eighth-step, and sixteenth-step
Adjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor's rated voltage toachieve higher step rates
Intelligent chopping control that automatically selects the correct current decay e (fast decay or slow decay)
Over-temperature thermal shutdown, under-voltage lockout, and crossover-current protection
Automatic current decay e detection / selection
Size:
A4988:20 x 15 x 11mm(LWH)
Heat Sink: 9 x 9 x 5mm(LWH)
B type:
Wiring method, red wire positive electrode, black wire negative electrode
Product name: 3D printer accessories
Voltage: DC12V
Speed: 5612±5%RPM
Rated current: 0.1A
Power consumption: 1.2W
Noise: 23DBA
Lifespan: 50000 hours 40Celsius
Temperature range: -10 +80Celsius
Fan size: 40x40x10mm
Spring size: 8x25mm
PTFE tube size: 2x4x1000mm
Package Contents:
1 x PTFE Tube
1 x Cooling Fan
4 x Spring
5 x Stepper Motor Diver ule
5 x Heat Sink
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1
Sản Phẩm Liên Quan
HOT
Bikini hàng Âu
₫ 400.000
HOT
Bikini Thái quả ngang chấm bi
₫ 350.000
HOT
Bikini made in Thailand
₫ 350.000
HOT
Bikini Thái
₫ 300.000
HOT
Bikini OKISS- QCXK
₫ 400.000
HOT
Bikini xuất Âu
₫ 300.000