4 Pin IR Ngọn Lửa Phát Hiện Cảm Biến Đầu Báo Cháy Thu Hồng Ngoại cho Arduino DIY
13.540
₫ 6.800
Sản phẩm 4 Pin IR Ngọn Lửa Phát Hiện Cảm Biến Đầu Báo Cháy Thu Hồng Ngoại cho Arduino DIY đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 13.540 xuống còn ₫ 6.800, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
🍀4 Pin IR Flame Detection Sensor Module Fire Detector Infrared Receiver Module for arduino Diy Kit🍀
💓Module Features:
1️⃣. Can detect the flame or the wavelength at 760 nm to 1100 nm range of the light source, the test flame lighters distance of 80cm, the larger the flame,
the greater the distance test.
2️⃣. The detection angle of 60 degrees, the flame spectrum particularly sensitive.
3️⃣. Sensitivity adjustable. (shown in blue digital potentiometer adjustment)
4️⃣. The comparator output signal clean waveform is good, driving ability, than 15mA.
5️⃣. With a precision potentiometer adjustable sensitivity adjustment.
6️⃣. Operating Voltage 3.3V-5V.
7️⃣. The output in the form: DO digital switching outputs (0 and 1) and AO analog voltage output.
8️⃣. A fixed bolt holes for easy installation.
9️⃣. Small plates PCB size: 3.2cmx1.4cm.
🔟.Using a wide voltage LM393 comparator.
💓Wiring Instructions:
1️⃣. VCC: VCC3.3-5V.
2️⃣ .GND: GND.
3️⃣. DO: TTL switch signal output.
4️⃣. AO: Analog Output.
💓Module For Use:
1️⃣. The flame flame sensor most sensitive to ordinary light is also a reaction, generally used as fire alarm and other purposes.
2️⃣. A small panel output interface can be directly connected with the microcontroller IO port.
3️⃣. The sensor and the flame to maintain a certain distance, so as not to damage the sensor temperature of the test flame lighters distance 80cm, the
larger the flame, the greater the distance test.
4️⃣. Small plates analog output mode and the AD conversion process, you can get higher accuracy.
💓Before purchase:
1️⃣.All the goods are ready stock, we will arrange the shipment at once if we receive the order.
2️⃣.Please read the item description, if you have any question, do not hesitate to contact us.
3️⃣.Use the vouchers for more saving.
💓Shipment：
1️⃣.1-2 days to ship(except for the pro-order item)
2️⃣.If you have not received the item after 15 days shipment,Please contact us.
💓After purchase:
1️⃣.If you are satisfied，please give us 5 stars praise.
2️⃣.Please contact us before you are going to give us bad review. We are helpful and will solve the problems.
#4 Pin #IR #Flame #Detection #Sensor #Module #Fire #Detector #Infrared #Receiver #Module #for #arduino #Diy
💓Module Features:
1️⃣. Can detect the flame or the wavelength at 760 nm to 1100 nm range of the light source, the test flame lighters distance of 80cm, the larger the flame,
the greater the distance test.
2️⃣. The detection angle of 60 degrees, the flame spectrum particularly sensitive.
3️⃣. Sensitivity adjustable. (shown in blue digital potentiometer adjustment)
4️⃣. The comparator output signal clean waveform is good, driving ability, than 15mA.
5️⃣. With a precision potentiometer adjustable sensitivity adjustment.
6️⃣. Operating Voltage 3.3V-5V.
7️⃣. The output in the form: DO digital switching outputs (0 and 1) and AO analog voltage output.
8️⃣. A fixed bolt holes for easy installation.
9️⃣. Small plates PCB size: 3.2cmx1.4cm.
🔟.Using a wide voltage LM393 comparator.
💓Wiring Instructions:
1️⃣. VCC: VCC3.3-5V.
2️⃣ .GND: GND.
3️⃣. DO: TTL switch signal output.
4️⃣. AO: Analog Output.
💓Module For Use:
1️⃣. The flame flame sensor most sensitive to ordinary light is also a reaction, generally used as fire alarm and other purposes.
2️⃣. A small panel output interface can be directly connected with the microcontroller IO port.
3️⃣. The sensor and the flame to maintain a certain distance, so as not to damage the sensor temperature of the test flame lighters distance 80cm, the
larger the flame, the greater the distance test.
4️⃣. Small plates analog output mode and the AD conversion process, you can get higher accuracy.
💓Before purchase:
1️⃣.All the goods are ready stock, we will arrange the shipment at once if we receive the order.
2️⃣.Please read the item description, if you have any question, do not hesitate to contact us.
3️⃣.Use the vouchers for more saving.
💓Shipment：
1️⃣.1-2 days to ship(except for the pro-order item)
2️⃣.If you have not received the item after 15 days shipment,Please contact us.
💓After purchase:
1️⃣.If you are satisfied，please give us 5 stars praise.
2️⃣.Please contact us before you are going to give us bad review. We are helpful and will solve the problems.
#4 Pin #IR #Flame #Detection #Sensor #Module #Fire #Detector #Infrared #Receiver #Module #for #arduino #Diy
Sản Phẩm Liên Quan
HOT
Bọt biển vệ sinh mũi mỏ hàn
₫ 2.000
HOT
Dây hơi khí nén PU bán theo mét
₫ 3.500