27MM Guitar Pickup Piezo Transducer Amplifier With 6.35MM Jack
123.000
₫ 74.000
Sản phẩm 27MM Guitar Pickup Piezo Transducer Amplifier With 6.35MM Jack đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 123.000 xuống còn ₫ 74.000, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
set2: 1x pickup + 3 sets x string(4 Strings in 1 Set)
Steel core, sier, ball
Made especially for 4/4 violins
Very easy to install and sounded good through several different amps.
Plug Dia. : 6.35mm/0.25 inch; Cable Length(Approx.) : 35cm/ 13.78 inch. Suitable for Guitar Violin Ukulele Mandolin Banjo box Guitar.
With the advantage of being able to eliminate interfering external sounds and not be influenced by sound reflections from nearby objects.
Material:Metal
1 set of strings for viola 4/4 includes:
1 x E string
1 x A string
1 x D string
1 x G string
COLOR:As Shown
The sound pickup is high-quality 27mm Piezoelectric ceramic disc transducer
It is very large and can collect a wider range of sound in case you are not sure where are the best parts of the sounds.
This is a pre-wired, pre-soldered piezo and jack harness which make it easy for you. All you have to do is to attach the piezo in or on your build, drill a hole and mount the jack. Then you're done!
Fit for most string music instruments such as Guitar Mandolin box Guitar Violin Ukulele Banjo, etc.
Installation instruction:
1 Take the plastic film down from the back of transducer to expose the adhesive
2 Place the transducer through the sound hole to the lower part of the front body where the guitar produces the best tonal response
3 Drill a hole from inside the body, loosen the end-pin jack nut, insert it to the hole and tighten the nut
The above procedures depend on different instruments.
Cable long : approx 32cm
Plug Dia: approx 6.35mm/0.25 inch
Package Contents:
1x pickup
4x gasket
1x knob
3 sets x string(4 Strings in 1 Set)Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1
Steel core, sier, ball
Made especially for 4/4 violins
Very easy to install and sounded good through several different amps.
Plug Dia. : 6.35mm/0.25 inch; Cable Length(Approx.) : 35cm/ 13.78 inch. Suitable for Guitar Violin Ukulele Mandolin Banjo box Guitar.
With the advantage of being able to eliminate interfering external sounds and not be influenced by sound reflections from nearby objects.
Material:Metal
1 set of strings for viola 4/4 includes:
1 x E string
1 x A string
1 x D string
1 x G string
COLOR:As Shown
The sound pickup is high-quality 27mm Piezoelectric ceramic disc transducer
It is very large and can collect a wider range of sound in case you are not sure where are the best parts of the sounds.
This is a pre-wired, pre-soldered piezo and jack harness which make it easy for you. All you have to do is to attach the piezo in or on your build, drill a hole and mount the jack. Then you're done!
Fit for most string music instruments such as Guitar Mandolin box Guitar Violin Ukulele Banjo, etc.
Installation instruction:
1 Take the plastic film down from the back of transducer to expose the adhesive
2 Place the transducer through the sound hole to the lower part of the front body where the guitar produces the best tonal response
3 Drill a hole from inside the body, loosen the end-pin jack nut, insert it to the hole and tighten the nut
The above procedures depend on different instruments.
Cable long : approx 32cm
Plug Dia: approx 6.35mm/0.25 inch
Package Contents:
1x pickup
4x gasket
1x knob
3 sets x string(4 Strings in 1 Set)Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1