2 Keo Ab Trong Suốt Dán Cần Câu Cá
118.100
₫ 59.400
Sản phẩm 2 Keo Ab Trong Suốt Dán Cần Câu Cá đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 118.100 xuống còn ₫ 59.400, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
------This product is on sale, if you are interested in this product, please do not hesitate to order from us. This is a good time❤️!------
Decription:
Features:
-This epoxy resin is mainly used for the outermost layer of the wires loop.
-This epoxy resin glue is a special curing glue for making raft fishing rod tip, card holder, and fishing rod guide ring DIY.
-Especially suitable for fishing friends to make DIY rods (raft rods, lure rods, etc.), simple to use and convenient for DIY. After curing, the surface is smooth and the inside is firm.
-It is recommended to test a small amount for the first time to accumulate experience. Apply a small amount of glue first, penetrate into the guide ring first, and then increase the amount according to the actual situation.
-The cured product has high bonding strength, good toughness, impacts resistance and vibration resistance.
How to Use:
The surface of the object to be bonded should be kept dry and clean.
It is not advisable to mix too much glue at one time.
Mix the two components A and B according to the ratio requirements, and mix them well before use.
It is recommended that the mixed glue be controlled at 30 Used up within -40 minutes, it can be positioned within 50-60 minutes after gluing.
It reaches about 50% of the highest strength in 3 hours, and reaches the highest strength after 24 hours.
Notice:
After the A and B are mixed, they must be mixed evenly to avoid affecting the curing.
Keep the seal after opening the B component.
The more glue mixed together, the faster the gel time.
Pay attention to ventilation in the working environment, and avoid contact between materials and skin during use.
Included:
2 x Fishing Rod
Decription:
Features:
-This epoxy resin is mainly used for the outermost layer of the wires loop.
-This epoxy resin glue is a special curing glue for making raft fishing rod tip, card holder, and fishing rod guide ring DIY.
-Especially suitable for fishing friends to make DIY rods (raft rods, lure rods, etc.), simple to use and convenient for DIY. After curing, the surface is smooth and the inside is firm.
-It is recommended to test a small amount for the first time to accumulate experience. Apply a small amount of glue first, penetrate into the guide ring first, and then increase the amount according to the actual situation.
-The cured product has high bonding strength, good toughness, impacts resistance and vibration resistance.
How to Use:
The surface of the object to be bonded should be kept dry and clean.
It is not advisable to mix too much glue at one time.
Mix the two components A and B according to the ratio requirements, and mix them well before use.
It is recommended that the mixed glue be controlled at 30 Used up within -40 minutes, it can be positioned within 50-60 minutes after gluing.
It reaches about 50% of the highest strength in 3 hours, and reaches the highest strength after 24 hours.
Notice:
After the A and B are mixed, they must be mixed evenly to avoid affecting the curing.
Keep the seal after opening the B component.
The more glue mixed together, the faster the gel time.
Pay attention to ventilation in the working environment, and avoid contact between materials and skin during use.
Included:
2 x Fishing Rod
Sản Phẩm Liên Quan
HOT
Bikini hàng Âu
₫ 400.000
HOT
Bikini Thái quả ngang chấm bi
₫ 350.000
HOT
Bikini made in Thailand
₫ 350.000
HOT
Bikini Thái
₫ 300.000
HOT
Bikini OKISS- QCXK
₫ 400.000
HOT
Bikini xuất Âu
₫ 300.000