1 Mô Tơ Hiển Thị Lcd 2004 20x4 Character 5v & 1pcs L293D Cho Arduino
211.000
₫ 126.000
Sản phẩm 1 Mô Tơ Hiển Thị Lcd 2004 20x4 Character 5v & 1pcs L293D Cho Arduino đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 211.000 xuống còn ₫ 126.000, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
1pcs 2004 5V 20X4 LCD & 1pcs L293D Motor drive ule
L293D is a monolithic integrated, high voltage, high current, 4-channel driver. Basically this means using this chip you can use DC motors and power supplies of up to 12 Volts, thats some pretty big motors and the chip can supply a maximum current of 600mA per channel, the L293D chip is also what's known as a type of H-Bridge.
The H-Bridge is typically an electrical circuit that enables a voltage to be applied across a load in either direction to an output, e.g. motor.
2 interface for 5V Servo connected to the Arduino's high-resolution dedicated timer - no jitter.
Can drive 4 DC motors or 2 stepper motors or 2 Servo.
The ule is a low-power consumption character LCD ule with a built-in controller. The ule can be easily interfaced with a MCU.
Fully assembled and tested Serial LCD 20x4 ule.
White Text, Blue backlight. Analog Interface.
The 2004A character LCD ule is designed to display letters, numbers, symbols, dot matrix.
Support 4-bit and 8-bit data transfer e.
Display contents: 20 characters x 4 lines
Operating voltage: + 5V
Display screen: Blue Screen
Operating temperature: -10°C - +60°C
Controller: SPLC780
ule size(W x H x T): 98.0 x 60.0 x 14.0mm
Viewing area(W x H): 76.0 x 26.0mm
Character size(W x H): 2.95 x 4.75mm
Dot size:(W x H): 0.55 x 0.55mm
Up to 4 bi-directional DC motors with individual 8-bit speed selection.
Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil or interleaved stepping.
4 H-Bridges: per bridge provides 0.6A (1.2A peak current) with thermal protection, can run motors on 4.5V to 12V DC.
Pull down resistors keep motors disabled during power-up.
reset button.
2 external terminal power interface, for seperate logic/motor supplies.Tested compatible for Arduino Mega, Diecimila & Duemilanove.
color: green & black
Material: PCB & plastic,metal
L293D Motor drive ule Size: 6.8 x 5.5 x 2cm
Package Contents:
1 x 2004 5V 20X4 LCD
1 x L293D Motor drive ule
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1
L293D is a monolithic integrated, high voltage, high current, 4-channel driver. Basically this means using this chip you can use DC motors and power supplies of up to 12 Volts, thats some pretty big motors and the chip can supply a maximum current of 600mA per channel, the L293D chip is also what's known as a type of H-Bridge.
The H-Bridge is typically an electrical circuit that enables a voltage to be applied across a load in either direction to an output, e.g. motor.
2 interface for 5V Servo connected to the Arduino's high-resolution dedicated timer - no jitter.
Can drive 4 DC motors or 2 stepper motors or 2 Servo.
The ule is a low-power consumption character LCD ule with a built-in controller. The ule can be easily interfaced with a MCU.
Fully assembled and tested Serial LCD 20x4 ule.
White Text, Blue backlight. Analog Interface.
The 2004A character LCD ule is designed to display letters, numbers, symbols, dot matrix.
Support 4-bit and 8-bit data transfer e.
Display contents: 20 characters x 4 lines
Operating voltage: + 5V
Display screen: Blue Screen
Operating temperature: -10°C - +60°C
Controller: SPLC780
ule size(W x H x T): 98.0 x 60.0 x 14.0mm
Viewing area(W x H): 76.0 x 26.0mm
Character size(W x H): 2.95 x 4.75mm
Dot size:(W x H): 0.55 x 0.55mm
Up to 4 bi-directional DC motors with individual 8-bit speed selection.
Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil or interleaved stepping.
4 H-Bridges: per bridge provides 0.6A (1.2A peak current) with thermal protection, can run motors on 4.5V to 12V DC.
Pull down resistors keep motors disabled during power-up.
reset button.
2 external terminal power interface, for seperate logic/motor supplies.Tested compatible for Arduino Mega, Diecimila & Duemilanove.
color: green & black
Material: PCB & plastic,metal
L293D Motor drive ule Size: 6.8 x 5.5 x 2cm
Package Contents:
1 x 2004 5V 20X4 LCD
1 x L293D Motor drive ule
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1
Sản Phẩm Liên Quan
HOT
Bikini hàng Âu
₫ 400.000
HOT
Bikini Thái quả ngang chấm bi
₫ 350.000
HOT
Bikini made in Thailand
₫ 350.000
HOT
Bikini Thái
₫ 300.000
HOT
Bikini OKISS- QCXK
₫ 400.000
HOT
Bikini xuất Âu
₫ 300.000