10 mũi khoan lỗ 6mm bọc kim cương cho vật liệu kính gạch men
32.000
₫ 25.000
Sản phẩm 10 mũi khoan lỗ 6mm bọc kim cương cho vật liệu kính gạch men đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 32.000 xuống còn ₫ 25.000, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
welcome to funnyhouse.vn
10 mũi khoan lỗ 6mm bọc kim cương cho vật liệu kính gạch men
Specification:
Brand new and high quality
Length: Approx.5cm
Hole size: Approx. 6mm
Need Cooling and lubrication
Diamond hole saw tile ceramic glass porcelain marble drill.
Always use lubrication (water) , if not the diamond core will over heat.
Use for conventional power drills on the low speed setting with the hammer action disabled.
These are auiable for drilling ceramic tiles, glass, marble, slate and porcelain tiles up to hardness grade 5
If you're drilling on a vertical surface try a hand spray water bottle, or sponge soaked in water and held underneath, but in contact with the drill bit.
Keep the bit as wet as possible during operation, if the bit dries out during use it will overheat and immediately blunt
How to use:
Clamped firmly to a bench to allow for slow controlled drilling.
If drilling in situ or at an awkward angle, cna try following method:
Make a template from a piece of timber or waste material, locate this over the area where you want to drill your hole and use it as a "guide" to start the hole.
Once you've got into the surface by 1mm to 2mm you can remove the guide and continue to drill in a controlled manner.
Start your hole diagonally, make a round trace and then hold drill straight
Package included:
10 x Diamond Holesaw 6mm Drill Bits Tool
#kính #men #lỗ #10 #khoan #liệu #vật #gạch #bọc #mũi #cho #6mm #cương #kim #bọc-kim #kính-gạch #cương-cho #vật-liệu
Note: Các sản phẩm có chất liệu vàng, kim cương, đá quý trong shop đều là xi mạ/ nhân
10 mũi khoan lỗ 6mm bọc kim cương cho vật liệu kính gạch men
Specification:
Brand new and high quality
Length: Approx.5cm
Hole size: Approx. 6mm
Need Cooling and lubrication
Diamond hole saw tile ceramic glass porcelain marble drill.
Always use lubrication (water) , if not the diamond core will over heat.
Use for conventional power drills on the low speed setting with the hammer action disabled.
These are auiable for drilling ceramic tiles, glass, marble, slate and porcelain tiles up to hardness grade 5
If you're drilling on a vertical surface try a hand spray water bottle, or sponge soaked in water and held underneath, but in contact with the drill bit.
Keep the bit as wet as possible during operation, if the bit dries out during use it will overheat and immediately blunt
How to use:
Clamped firmly to a bench to allow for slow controlled drilling.
If drilling in situ or at an awkward angle, cna try following method:
Make a template from a piece of timber or waste material, locate this over the area where you want to drill your hole and use it as a "guide" to start the hole.
Once you've got into the surface by 1mm to 2mm you can remove the guide and continue to drill in a controlled manner.
Start your hole diagonally, make a round trace and then hold drill straight
Package included:
10 x Diamond Holesaw 6mm Drill Bits Tool
#kính #men #lỗ #10 #khoan #liệu #vật #gạch #bọc #mũi #cho #6mm #cương #kim #bọc-kim #kính-gạch #cương-cho #vật-liệu
Note: Các sản phẩm có chất liệu vàng, kim cương, đá quý trong shop đều là xi mạ/ nhân
Sản Phẩm Liên Quan
HOT
Máy thổi bụi
₫ 630.000
HOT
Đĩa thổi khí thô SSI AFC75
₫ 220.000
HOT
Máy thổi Makita UB1103
₫ 1.600.000
HOT
Bộ Tua Vít 10 Món JM-8143
₫ 60.500
HOT
Van Nước Bàn Gội Đầu [Van Gật Gù]
₫ 320.000
HOT
ỐP SƠN MÀI DÀNH CHO IPHONE
₫ 119.200