1 Thước Đo Khoảng Cách Thu Âm Cho Đàn Guitar
114.000
₫ 94.000
Sản phẩm 1 Thước Đo Khoảng Cách Thu Âm Cho Đàn Guitar đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 114.000 xuống còn ₫ 94.000, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Description: 100% brand new
Features: High contrast cartridge alignment protractor provides improved visibility and eliminates tracking errors.
Avoids the over-shoot distortion to keep high quality sound
Link to turntable setup guide with instructions included, printed directly on the protractor.
Works with an S -Shaped arm and any 1/2inch mounted cartridge.
Extra magnifier make you more clear when adjusting the overhang.
Instructions: 1. Place this protractor on your turntable platter with hole over spindle.
2. Move cartridge/ tonearm until stylus rests exactly on center of bulls eye. (120.9mm radius). Check that cartridge is square with outer set of grid lines. - If not, loosen cartridge mounting screws and twist cartridge lightly until it is square.
3. Move cartridge/ tonearm until stylus rests exactly on center of inner bulls-eye (66.04mm radius), Rotate protractor around spindle as required. Check that cartridge is square with inner set of grid lines. If not, change overhang, (move cartridge in or out along the axis) until cartridge is square.
4. Repeat step 2 and 3 till cartridge is square at both points. Tighten mounting, and recheck as above. Remove Protractor. Relax and enjoy!
Width: 50.5mm
colour: white
Material: acrylic
size: 211.5mm
Package Contents:
1 x Overshoot ProtractorOnly the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1
Features: High contrast cartridge alignment protractor provides improved visibility and eliminates tracking errors.
Avoids the over-shoot distortion to keep high quality sound
Link to turntable setup guide with instructions included, printed directly on the protractor.
Works with an S -Shaped arm and any 1/2inch mounted cartridge.
Extra magnifier make you more clear when adjusting the overhang.
Instructions: 1. Place this protractor on your turntable platter with hole over spindle.
2. Move cartridge/ tonearm until stylus rests exactly on center of bulls eye. (120.9mm radius). Check that cartridge is square with outer set of grid lines. - If not, loosen cartridge mounting screws and twist cartridge lightly until it is square.
3. Move cartridge/ tonearm until stylus rests exactly on center of inner bulls-eye (66.04mm radius), Rotate protractor around spindle as required. Check that cartridge is square with inner set of grid lines. If not, change overhang, (move cartridge in or out along the axis) until cartridge is square.
4. Repeat step 2 and 3 till cartridge is square at both points. Tighten mounting, and recheck as above. Remove Protractor. Relax and enjoy!
Width: 50.5mm
colour: white
Material: acrylic
size: 211.5mm
Package Contents:
1 x Overshoot ProtractorOnly the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1
Sản Phẩm Liên Quan
HOT
Bikini hàng Âu
₫ 400.000
HOT
Bikini Thái quả ngang chấm bi
₫ 350.000
HOT
Bikini made in Thailand
₫ 350.000
HOT
Bikini Thái
₫ 300.000
HOT
Bikini OKISS- QCXK
₫ 400.000
HOT
Bikini xuất Âu
₫ 300.000