1 Keo Dán Sửa Chữa Màn Hình Cảm Ứng Điện Thoại 15ml T8000
23.000
₫ 15.000
Sản phẩm 1 Keo Dán Sửa Chữa Màn Hình Cảm Ứng Điện Thoại 15ml T8000 đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 23.000 xuống còn ₫ 15.000, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,1 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Welcome to our store, we will be happy to help you.
Decription:
Features:
Paste adhesive can be more material on metal, glass, ceramics, stone, bamboo, cloth, leather, Shade, mobile door,ABS, nylon, sponge, film, fabric, electronic components, PE, PVC, PP and other plastic,Rubber, fiber, paper, paste mobile phone border, LCD screen and other materials have a good paste performance.
Features: Not white, Not yellow, not stiff, Ultra-low odor, Low wire drawing, Curing fast.
Instructions:
1. before use carefully read the product description introduction.
2. In front of a large area, please do test a small area.
3. Make sure that the sticky surface clean and dry.
4. The optimum temperature should be between 18-32 degrees.
5. The product can be directly lid on demand is evenly coated surface of the adherend.
6. Wait 3-6minutes, and the two are aligned adhesive sticky little pressure.
7. Put a few hours can be, 48 hours to reach the best condition.
8. When the product is not in use, please cover the lid, avoid glue and air contact after curing.
Included:
1 x
Decription:
Features:
Paste adhesive can be more material on metal, glass, ceramics, stone, bamboo, cloth, leather, Shade, mobile door,ABS, nylon, sponge, film, fabric, electronic components, PE, PVC, PP and other plastic,Rubber, fiber, paper, paste mobile phone border, LCD screen and other materials have a good paste performance.
Features: Not white, Not yellow, not stiff, Ultra-low odor, Low wire drawing, Curing fast.
Instructions:
1. before use carefully read the product description introduction.
2. In front of a large area, please do test a small area.
3. Make sure that the sticky surface clean and dry.
4. The optimum temperature should be between 18-32 degrees.
5. The product can be directly lid on demand is evenly coated surface of the adherend.
6. Wait 3-6minutes, and the two are aligned adhesive sticky little pressure.
7. Put a few hours can be, 48 hours to reach the best condition.
8. When the product is not in use, please cover the lid, avoid glue and air contact after curing.
Included:
1 x
Sản Phẩm Liên Quan
HOT
Bikini hàng Âu
₫ 400.000
HOT
Bikini Thái quả ngang chấm bi
₫ 350.000
HOT
Bikini made in Thailand
₫ 350.000
HOT
Bikini Thái
₫ 300.000
HOT
Bikini OKISS- QCXK
₫ 400.000
HOT
Bikini xuất Âu
₫ 300.000