1 Bút Hút Thiếc Nhôm Loại Bỏ Mối Hàn
₫ 56.300
Sản phẩm 1 Bút Hút Thiếc Nhôm Loại Bỏ Mối Hàn đang được mở bán với mức giá siêu tốt khi mua online, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Note:
Please allow 1-5mm errors due to manual measurement
Item color displayed in photos may be showing slightly different on your computer monitor since monitors are not calibrated same
Operation Manual:
-Put the tin suctioner piston downward pressure to get stuck.
-Heating solder joints to solder melting with electric soldering iron.
-Remove the iron and quickly put the tin suctioner resistance paste solder, solder sucker and press the button.
-If It is not clean at one time and can be repeated many times.
Using skills:
-To ensure good solder sucker piston seal. Before electricity, with your fingers to plug hole solder sucker head, solder sucker head to press the button, if the piston is not easy to pop into place, that the seal is good.
-The aperture tin suctioner heads are of different sizes, select the appropriate specifications.
-Tin suctioner head wears, should replace the new one.
-Solder paste is dipped in a little bit of rosin before contact with solder to improve solder fluidity.
-Head contact pads are slightly longer, when solder melts, the solder joint pin as the center, then hand out in a clockwise direction to draw a circle, and then
Please allow 1-5mm errors due to manual measurement
Item color displayed in photos may be showing slightly different on your computer monitor since monitors are not calibrated same
Operation Manual:
-Put the tin suctioner piston downward pressure to get stuck.
-Heating solder joints to solder melting with electric soldering iron.
-Remove the iron and quickly put the tin suctioner resistance paste solder, solder sucker and press the button.
-If It is not clean at one time and can be repeated many times.
Using skills:
-To ensure good solder sucker piston seal. Before electricity, with your fingers to plug hole solder sucker head, solder sucker head to press the button, if the piston is not easy to pop into place, that the seal is good.
-The aperture tin suctioner heads are of different sizes, select the appropriate specifications.
-Tin suctioner head wears, should replace the new one.
-Solder paste is dipped in a little bit of rosin before contact with solder to improve solder fluidity.
-Head contact pads are slightly longer, when solder melts, the solder joint pin as the center, then hand out in a clockwise direction to draw a circle, and then
Sản Phẩm Liên Quan
HOT
Bikini hàng Âu
₫ 400.000
HOT
Bikini Thái quả ngang chấm bi
₫ 350.000
HOT
Bikini made in Thailand
₫ 350.000
HOT
Bikini Thái
₫ 300.000
HOT
Bikini OKISS- QCXK
₫ 400.000
HOT
Bikini xuất Âu
₫ 300.000