1 Bộ V6 Hot End Full Kit 1.75mm 12v Bowden / Reprap & 1pcs Máy In 3d
321.000
₫ 182.970
Sản phẩm 1 Bộ V6 Hot End Full Kit 1.75mm 12v Bowden / Reprap & 1pcs Máy In 3d đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 321.000 xuống còn ₫ 182.970, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
1 set V6 Hot End Full Kit 1.75mm 12V Bowden/Reprap with all metal V6 hotend 12V/40W/1.75mm/0.4mm nozzle/extruder, 12V high speed fan with shroud, One meter long PTFE/PTFE tubing 4mm OD 2mm ID, PC4-01 Tube Fitting, 0.3mm nozzle print head,V6 heating block, PTFE tube within stainless steel nozzle throat & 1pcs MKS FES sensor ule with MKS 3pin cable:Material:Plastic, metal & metal,stainless steel
Specification:12V/40W heater,temperature can be up to 280 Celsius(Long-term temperature:240 Celsius/short-term temperature:280 Celsius)
One meter long PTFE/PTFE tubing 4mm OD 2mm ID
PC4-01 tube fitting
Compatibility:compatible with all 1.75mm V6 3D Makerbot 3D printer.
When the filament crosses the ule and press the slide, enter the high level and the lights are off.
When there is no filament, the switch will hit, then enter a low level and the light is on, the buzzer sounds to give you advice. In such a situation, add the filament and it will remain printed.
Name :MKS FES V1.0
Connection:
1. Connect to "PB1 inch on MKS TFT screen;
2. Connect to "MT-DET" in MKS Robin.
Item Type:Switch
el Number:Filament Detection Sensor ule
Color:picture color
Material:Plastic, metal & metal,stainless steel
Package contents:
1 * all metal V6 hotend 12V/40W/1.75mm/0.4mm nozzle/extruder
1 * 12V high speed fan with shroud
1 * One meter long PTFE/PTFE tubing 4mm OD 2mm ID
1 * PC4-01 Tube Fitting
1 * 0.3mm nozzle print head
1 * 0.4mm nozzle print head
1 * 0.5mm nozzle print head
1 * V6 heating block
2 * PTFE tube within stainless steel nozzle throat
1 * MKS FES sensor ule
1 * MKS 3pin cable
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1
Specification:12V/40W heater,temperature can be up to 280 Celsius(Long-term temperature:240 Celsius/short-term temperature:280 Celsius)
One meter long PTFE/PTFE tubing 4mm OD 2mm ID
PC4-01 tube fitting
Compatibility:compatible with all 1.75mm V6 3D Makerbot 3D printer.
When the filament crosses the ule and press the slide, enter the high level and the lights are off.
When there is no filament, the switch will hit, then enter a low level and the light is on, the buzzer sounds to give you advice. In such a situation, add the filament and it will remain printed.
Name :MKS FES V1.0
Connection:
1. Connect to "PB1 inch on MKS TFT screen;
2. Connect to "MT-DET" in MKS Robin.
Item Type:Switch
el Number:Filament Detection Sensor ule
Color:picture color
Material:Plastic, metal & metal,stainless steel
Package contents:
1 * all metal V6 hotend 12V/40W/1.75mm/0.4mm nozzle/extruder
1 * 12V high speed fan with shroud
1 * One meter long PTFE/PTFE tubing 4mm OD 2mm ID
1 * PC4-01 Tube Fitting
1 * 0.3mm nozzle print head
1 * 0.4mm nozzle print head
1 * 0.5mm nozzle print head
1 * V6 heating block
2 * PTFE tube within stainless steel nozzle throat
1 * MKS FES sensor ule
1 * MKS 3pin cable
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1
Sản Phẩm Liên Quan
HOT
Bikini hàng Âu
₫ 400.000
HOT
Bikini Thái quả ngang chấm bi
₫ 350.000
HOT
Bikini made in Thailand
₫ 350.000
HOT
Bikini Thái
₫ 300.000
HOT
Bikini OKISS- QCXK
₫ 400.000
HOT
Bikini xuất Âu
₫ 300.000