1 bộ mô đun truyền nhận tín hiệu TX / RX-2.4G 6 kênh điều khiển từ xa

1 set TX/RX-2.4G module transmitter receiver 6 channel remote control
100% brand new, high quality
Characteristics:
Adopt high quality material, strong, durable and good performance, stability and reliability.
At 2.4 g ISM frequency band can be used at the same time without interference.
High performance baseband processing chip, fast remote control and high security level.
Internal 2.4 g program and remote control code program are included, and there is no need to reprogram and use it directly.
With 6 input and output functions, it can be expanded and the optional output state is locked or unlocked.
High integration, small size, low power consumption design, no peripheral parts, easy to use.
It is widely used in wireless remote control, intelligent appliances, wireless sensor, SAMRT home control system, etc.
Decoder board, other parts of the picture demonstration not included!

Specifications:
Materials: PCB board, electronic components
Optional type and size: app.1.3x2.5cm/0.51x0.98 in
Color: green
Number: 1 set

Product parameters:
Ty24D-Tx (launch module)
Frequency of work: 2.4G
Working voltage: 2.5-3.6V
Launch current: 0-15mA
Output power: 5 decibels
Dormant current: 3.5 ua
Mode of modulation: GFSK
Maximum speed: 1M
Control port: 6 way button input
Coding: learning code
Antenna form: PCB antenna
Reference distance 50 m (visits)

Ty24D-Rx (receiving module)
Frequency of work: 2.4G
Working voltage: 2.5-3.6V
Emission current: 23 ms
Reception sensitivity: - 85dBm
Mode of modulation: GFSK
Data channel: 6 channels
Output state: lock/non-lock
Output level: 0 high level
Coding: learning the address data of the code, automatic identification of remote control
Antenna form: PCB antenna
Reference distance 50 m (visits)

Introduction:
Ty24D-Tx:
Vcc:+3.3V (2.5-3.6)
B1-B6: 6 channel data pins, when connected to the send button, low level is effective
B7: effective for scale, learning button, low level
B8: code and launch status indicator right, LED
Gnd: gnd

Ty24D-Rx:
Vcc:+3.3V (2.5-3.6)
B1-B6: 6 channel data pins, usually 0 level when output is high
B7: code/bar code, ground code, suspended code
B8: output mode selection, ground locked output, and VCC non-locked output
Gnd: gnd

Rx mode conversion function:
Latch mode: the RX output port is usually 0-level, press the button once, receive the output high-level and lock saver, and press the button again, the receiving output becomes 0-level, and the B8 port needs to be connected to the GND.
Non-Locking mode: press the launch button, receive output high level, release the button, and accept level 0.The b8 port needs to be connected to VDD.

Code and disable code functions:
Code that tx and RX must use. Rx can only identify TX with successful code.After the code succeeds, the B7 code port must be diskonnected (floating) to prohibit other TX pairs to prevent other remote controls from illegally controlled code.Your receiving device.Receiving a code port does not limit the number of remote controls (multi