Thước Đo Góc Cơ Khí Có Độ Chính Xác Cao 10mm Chuyên Dụng
245.000
₫ 175.200
Sản phẩm Thước Đo Góc Cơ Khí Có Độ Chính Xác Cao 10mm Chuyên Dụng đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 245.000 xuống còn ₫ 175.200, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Characteristics:
The 10 mm straight handle can be installled on a cutting or drilling card plate.
4 mm antimagnetic probe designed for small aperture and narrow groove measurement.
Suitable for 400-600 rp speed.< br > spring force is small, can avoid small milling cutter or bit breakage.
Quickly locate the working edge and determine the precise machining center.
A finger on the side of the measuring instrument is eccentricized by force of light pressure by 0.5 mm.
Specifications:
Material: high speed steel
Color: as shown in the figure < sha > (diameter): 10mm
Probe (diameter): packaging consisting of 4mm < br >:
1x10mm shank mechanical edge finder
1 spring
1 yellow storage box
Note:
- the color of the project may be slightly different from that of the picture due to differences in light and screen.
- due to manual measurements, please allow a difference of 0.5-2 centimeters.
Attention to the use of eccentric range finder:
- don't bend or drag the edge finder, otherwise it will affect accuracy;
- do not adhere to foreign bodies or dust on sliding end surfaces;
- at the time of measurement, the speed should not exceed 600 ppm; 4.Offset edge finder is not applicable to horizontal mach
The 10 mm straight handle can be installled on a cutting or drilling card plate.
4 mm antimagnetic probe designed for small aperture and narrow groove measurement.
Suitable for 400-600 rp speed.< br > spring force is small, can avoid small milling cutter or bit breakage.
Quickly locate the working edge and determine the precise machining center.
A finger on the side of the measuring instrument is eccentricized by force of light pressure by 0.5 mm.
Specifications:
Material: high speed steel
Color: as shown in the figure < sha > (diameter): 10mm
Probe (diameter): packaging consisting of 4mm < br >:
1x10mm shank mechanical edge finder
1 spring
1 yellow storage box
Note:
- the color of the project may be slightly different from that of the picture due to differences in light and screen.
- due to manual measurements, please allow a difference of 0.5-2 centimeters.
Attention to the use of eccentric range finder:
- don't bend or drag the edge finder, otherwise it will affect accuracy;
- do not adhere to foreign bodies or dust on sliding end surfaces;
- at the time of measurement, the speed should not exceed 600 ppm; 4.Offset edge finder is not applicable to horizontal mach
Sản Phẩm Liên Quan
HOT
Bikini hàng Âu
₫ 400.000
HOT
Bikini Thái quả ngang chấm bi
₫ 350.000
HOT
Bikini made in Thailand
₫ 350.000
HOT
Bikini Thái
₫ 300.000
HOT
Bikini OKISS- QCXK
₫ 400.000
HOT
Bikini xuất Âu
₫ 300.000